Jerry Geis wrote: > Sander Sweers wrote: >> On wo, 2007-07-18 at 20:39 +0200, Hans Verkuil wrote: >> >>> On Wednesday 18 July 2007 19:58:49 Jerry Geis wrote: >>> >>>> ivtv0: Failed to load module cx25840 >>>> ivtv0: Failed to load module wm8775 >>>> >>> Your missing these two modules! >>> >>> See the README with the ivtv sources how to configure your kernel to >>> make sure these modules are compiled. >>> >> >> Or look at the howto [1] on the wiki which has this documented in >> detail. >> >> Greets >> Sander >> >> >> > > I had documented all I did to get a previous PVR-150 working. I had the > correct module > enabled in the kernel but there is no module in the /lib/module... > directory. > I am in the process of redoing the kernel step and watching closely. > > THanks, > > Jerry >
I re-did the kernel and now I have video. Not sure what happened the first time. The problem now is no audio? So when I do mplayer /dev/video I get the video but no audio. Audio is working on the machine as if I play a wave file I hear it just fine. Jerry ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.4 (tagged release) loading ivtv: Linux version: 2.6.21.1 SMP mod_unload ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 tveeprom 0-0050: Hauppauge model 25012, rev C5A3, serial# 9957397 tveeprom 0-0050: tuner model is TCL MFNM05-4 (idx 103, type 43) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is CX25843 (idx 37) tveeprom 0-0050: decoder processor is CX25843 (idx 30) tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-150 tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio tuner 0-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
