Hi Mailinglist Users,
According to the Mailinglist rules: I am not subscribed to this List.
I downloaded and installed today the new 0.10.4 driver in the hope that
this driver now supports my TV-Card, also because i have seen this:
...
#ifdef HAVE_XC3028
/* Yuan PG600-2/GotView PCI DVD Lite/Club3D ZAP-TV1x01 cards */
...
in the ivtv-cards.c inside the ivtv-0.10.4.tar.gz:/ivtv-0.10.4/driver/
I dont have a clue about programming, i am just a normal user. So i
thought the driver would detect my card automatically. But it has not.
The dmesg output of the ivtv modules:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.4 (tagged release) loading
ivtv: Linux version: 2.6.21-1.3228.fc7 SMP mod_unload
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
eth0: forcedeth.c: subsystem: 01462:7310 bound to 0000:00:0a.0
ivtv0: Autodetected Yuan PG600, Diamond PVR-550 card (cx23416 based)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKC] -> GSI 19 (level,
low) -> IRQ 19
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x6000
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Initialized Yuan PG600, Diamond PVR-550, card #0
ivtv: ==================== END INIT IVTV ====================
lspci -v:
01:08.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Unknown device ffab:0600
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at cc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
My Linux distribution is Fedora 7. The Kernel is
kernel-2.6.21-1.3228.fc7 arch:x86_64
Do i have to add some lines or options in my modprobe.conf?
Please help me.
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
