On Saturday 25 August 2007 15:03:34 Scott Bickford wrote:
> > You'll have to quit MythTV first. And I assume that /dev/video0 is
> > your PVR350, it might be another device (but you probably
> > understood that).
> >
> > Regards,
> >
> > Hans
>
> actually, I renamed modprobe.conf to a backup file as well as putting
> in an old xorg.conf.
> oops, I see mythbackend is still running.
>
> There were stutters.
>
> Here's
>
>
> Status Log:
>
> ivtv0: ================= START STATUS CARD #0 =================
> tveeprom 2-0050: Hauppauge model 48132, rev K268, serial# 7614804
> tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type
> 47) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
> tveeprom 2-0050: audio processor is MSP4448 (idx 27)
> tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
> tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
> tda9887 2-0043: Data bytes: b=0x14 c=0x30 e=0x44
> tuner 2-0061: Tuner mode: analog TV
> tuner 2-0061: Frequency: 55.25 MHz
> tuner 2-0061: Standard: 0x0000b000
> saa7115 2-0021: Audio frequency: 44100 Hz
^^^^^^^^^^^^^^^^^^^^^^^
Audio frequency is set to 44.1 kHz, while
> ivtv0: Audio: 48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No
^^^^^^^^^^^^^^^^^^^^^^^
the recording is at 48 kHz.
How do you manage to do that?! The audio frequency for saa7115 should be
48 kHz as well. Make sure you don't have duplicate saa7115 modules in
your /lib/modules directory. Perhaps you are using a very old one
accidentally.
Regards,
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
