I did some more testing to try to narrow this down. I ran a log status before view video in x / MythTv, everything looks ok (X loads ok):
[EMAIL PROTECTED] log]# v4l2-ctl --log-status Status Log: ivtv0: ================= START STATUS CARD #0 ================= tveeprom 2-0050: Hauppauge model 48132, rev K268, serial# 7614804 tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is MSP4448 (idx 27) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter tda9887 2-0043: Data bytes: b=0x14 c=0x30 e=0x44 tuner 2-0061: Tuner mode: analog TV tuner 2-0061: Frequency: 217.25 MHz tuner 2-0061: Standard: 0x0000b000 saa7115 2-0021: Audio frequency: 48000 Hz saa7115 2-0021: Input: Composite 4 saa7115 2-0021: Video signal: broadcast/DVD saa7115 2-0021: Frequency: 60 Hz saa7115 2-0021: Detected format: NTSC saa7115 2-0021: Width, Height: 720, 480 saa7127 2-0044: Standard: 60 Hz saa7127 2-0044: Input: normal saa7127 2-0044: Output: S-Video + Composite saa7127 2-0044: WSS: disabled saa7127 2-0044: VPS: disabled saa7127 2-0044: CC: disabled msp3400 2-0040: MSP4448G-A2 rev1 = 0x0117 rev2 = 0x3042 msp3400 2-0040: Audio: volume 58880 msp3400 2-0040: Standard: 4.5 M BTSC-Stereo (stereo) msp3400 2-0040: Audmode: 0x0001 msp3400 2-0040: Routing: 0x00000000 (input) 0x00000044 (output) msp3400 2-0040: ACB: 0x0c00 ivtv0: Video Input: Tuner 1 ivtv0: Audio Input: Tuner 1 ivtv0: Video Output: S-Video + Composite ivtv0: Audio Output: A/V Audio Out ivtv0: Output Mode: None ivtv0: Tuner: TV ivtv0: Stream: MPEG-2 Program Stream ivtv0: VBI Format: No VBI ivtv0: Video: 720x480, 30 fps ivtv0: Video: MPEG-2, <invalid>, Variable Bitrate, 6000000, Peak 8000000 ivtv0: Video: GOP Size 12, 2 B-Frames, GOP Closure ivtv0: Audio: 48 kHz, Layer II, 224 kbps, Stereo, No Emphasis, No CRC ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 ivtv0: Temporal Filter: Manual, 8 ivtv0: Median Filter: Off, Luma [0, 0], Chroma [0, 0] ivtv0: Status flags: 0x00000080 ivtv0: Stream encoder MPEG: status 0x0000, 0% of 4096 KiB (128 buffers) in use ivtv0: Stream encoder YUV: status 0x0000, 0% of 2046 KiB (194 buffers) in use ivtv0: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (60 buffers) in use ivtv0: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 buffers) in use ivtv0: Stream decoder MPEG: status 0x0000, 0% of 1024 KiB (16 buffers) in use ivtv0: Stream decoder VBI: status 0x0000, 0% of 1023 KiB (455 buffers) in use ivtv0: Stream decoder YUV: status 0x0000, 0% of 1012 KiB (24 buffers) in use ivtv0: Read MPEG/VBI: 0/0 bytes ivtv0: ================== END STATUS CARD #0 ================== [EMAIL PROTECTED] log]# And here's the log while watching a video in MythTv: [EMAIL PROTECTED] log]# v4l2-ctl --log-status Status Log: ivtv0: ================= START STATUS CARD #0 ================= tveeprom 2-0050: Hauppauge model 48132, rev K268, serial# 7614804 tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is MSP4448 (idx 27) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter tda9887 2-0043: Data bytes: b=0x14 c=0x30 e=0x44 tuner 2-0061: Tuner mode: analog TV tuner 2-0061: Frequency: 229.25 MHz tuner 2-0061: Standard: 0x0000b000 saa7115 2-0021: Audio frequency: 44100 Hz saa7115 2-0021: Input: Composite 4 saa7115 2-0021: Video signal: broadcast/DVD saa7115 2-0021: Frequency: 60 Hz saa7115 2-0021: Detected format: NTSC saa7115 2-0021: Width, Height: 480, 480 saa7127 2-0044: Standard: 60 Hz saa7127 2-0044: Input: normal saa7127 2-0044: Output: S-Video + Composite saa7127 2-0044: WSS: disabled saa7127 2-0044: VPS: disabled saa7127 2-0044: CC: disabled msp3400 2-0040: MSP4448G-A2 rev1 = 0x0117 rev2 = 0x3042 msp3400 2-0040: Audio: volume 58950 msp3400 2-0040: Standard: 4.5 M BTSC-Stereo (stereo, dual) msp3400 2-0040: Audmode: 0x0001 msp3400 2-0040: Routing: 0x00000000 (input) 0x00000044 (output) msp3400 2-0040: ACB: 0x0c00 ivtv0: Video Input: Tuner 1 ivtv0: Audio Input: Tuner 1 ivtv0: Video Output: S-Video + Composite ivtv0: Audio Output: A/V Audio Out ivtv0: Output Mode: MPEG Streaming ivtv0: Tuner: TV ivtv0: Stream: MPEG-2 Program Stream ivtv0: VBI Format: No VBI ivtv0: Video: 480x480, 30 fps ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 4500000, Peak 6000000 ivtv0: Video: GOP Size 12, 2 B-Frames, GOP Closure ivtv0: Audio: 48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No CRC ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma Off, 0 ivtv0: Temporal Filter: Manual, 0 ivtv0: Median Filter: Off, Luma [0, 0], Chroma [0, 0] ivtv0: Status flags: 0x00000040 ivtv0: Stream encoder MPEG: status 0x0118, 0% of 4096 KiB (128 buffers) in use ivtv0: Stream encoder YUV: status 0x0000, 0% of 2046 KiB (194 buffers) in use ivtv0: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (60 buffers) in use ivtv0: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 buffers) in use ivtv0: Stream decoder MPEG: status 0x011c, 0% of 1024 KiB (16 buffers) in use ivtv0: Stream decoder VBI: status 0x0028, 0% of 1023 KiB (455 buffers) in use ivtv0: Stream decoder YUV: status 0x0000, 0% of 1012 KiB (24 buffers) in use ivtv0: Read MPEG/VBI: 30687232/0 bytes ivtv0: ================== END STATUS CARD #0 ================== [EMAIL PROTECTED] log]# As you can see the audio and even size are different from the start. And yet, I have Myth default record profile set to 720x480. Is there any way I can set SAA7115 to 48000 as well 720x480?
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
