> Hmm, there is another option which is to upgrade the whole video4linux > part: get the master v4l-dvb repository here: > http://linuxtv.org/hg/v4l-dvb/archive/tip.tar.bz2 > > Make a copy of /lib/modules/`uname -r` first, just in case. > Then unpack, run 'make', then 'make install' as root and reboot. > > Now the whole v4l subsystem has been replaced with the latest and > greatest. However, how also need a MythTV patch from Ian Armstrong that > was recently posted to get MythTV working with the PVR-350 TV output > since the API changed. > > Regards, > Hans,
Thx for the tip! I did as suggested and all seemed to go okay, but my version still says 0.7.4. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.4 (tagged release) loading ivtv: Linux version: 2.6.17-5mdv SMP mod_unload gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0043: type set to tda9887 tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) lirc_i2c: chip found @ 0x18 (Hauppauge IR) lirc_dev: lirc_register_plugin: sample_rate: 10 tveeprom 0-0050: Hauppauge model 48132, rev K268, serial# 9921474 tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP4448 (idx 27) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has radio, has IR remote saa7115: Unknown symbol v4l2_ctrl_query_fill_std saa7115: Unknown symbol v4l2_chip_ident_i2c_client ivtv0: Failed to load module saa7115 saa7127: Unknown symbol v4l2_chip_ident_i2c_client ivtv0: Failed to load module saa7127 msp3400: Unknown symbol v4l2_ctrl_query_fill_std msp3400: Unknown symbol v4l2_chip_ident_i2c_client ivtv0: Failed to load module msp3400 ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner-simple 0-0061: type set to 47 (LG NTSC (TAPE series)) tuner 0-0061: type set to LG NTSC (TAPE series) ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: i2c addr 0x21 not found for command 0x4008646f! ivtv0: i2c hardware 0x00000008 not found for command 0x4008646d! ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== Any theories? Scott _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
