First please stop top posting! On Thu, Apr 3, 2008 at 1:37 PM, <[EMAIL PROTECTED]> wrote: > I upgraded the kernel to 2.6.23.15-80.fc7 and I still have the same problem.
The PVR-500 is 2 pvr-150 on 1 card. It has the same problems you would normally have with 2 pvr-150's in 1 system or 2 tv's on the same cable. The signal is split between the 2 tuners and if the signal strength is too low this is could *cause* the symptoms you are describing. > Should I upgrade the firmware? Currently running > ivtv-firmware-20070217-13.at. The recommended firmware version can be found on [1]. > Below is the output of dmesg | grep ivtv. Do you see anything unusual? Do not grep for only ivtv but copy the whole init from start to finish. See [2] on how to ask for help. I see nothing unusual in the output below but we really need to see the whole init to be sure. Greets Sander [1] http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz [2] http://www.ivtvdriver.org/index.php/Asking_for_help > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 1.0.0 (2.6.22.9-91.fc7 SMP mod_unload 686 4KSTACKS ) loading > ivtv0: Autodetected Hauppauge card (cx23416 based) > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (4154787520 bytes) > ivtv0: Encoder revision: 0x02060039 > ivtv0: Autodetected WinTV PVR 500 (unit #1) > > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > > tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: Registered device video0 for encoder MPEG (4 MB) > ivtv0: Registered device video32 for encoder YUV (2 MB) > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > ivtv0: Registered device radio0 for encoder radio > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 > ivtv: ====================== NEXT CARD ====================== > ivtv1: Autodetected Hauppauge card (cx23416 based) > ivtv1: Unreasonably low latency timer, setting to 64 (was 32) > ivtv1: loaded v4l-cx2341x-enc.fw firmware (4153077520 bytes) > ivtv1: Encoder revision: 0x02060039 > > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) > > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) > cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1) > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) > ivtv1: Correcting tveeprom data: no radio present on second unit > ivtv1: Autodetected WinTV PVR 500 (unit #2) > ivtv1: Registered device video1 for encoder MPEG (4 MB) > ivtv1: Registered device video33 for encoder YUV (2 MB) > ivtv1: Registered device vbi1 for encoder VBI (1 MB) > ivtv1: Registered device video25 for encoder PCM audio (1 MB) > ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 > ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
