On Mon, May 19, 2008 at 5:25 PM, Russell Treleaven <[EMAIL PROTECTED]> wrote: > I just tried that and I still see > msp3400 0-0040: chip reset failed > > Plus ivtvclt and v4l2-ctl are not installed so I can't use my card. > > Am I missing something? > Sorry for me these were still installed from ivtv-0.10.5
# equery belongs /usr/bin/v4l2-ctl [ Searching for file(s) /usr/bin/v4l2-ctl in *... ] media-tv/ivtv-0.10.5 (/usr/bin/v4l2-ctl) jmd1 ~ # but I am using the v4l-dvb-hg driver as the version is 1.2.1 # dmesg | grep ivtv [ 53.759024] ivtv: Start initialization, version 1.2.1 [ 53.929596] ivtv0: Initializing card #0 [ 53.929600] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 53.985952] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 54.097547] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 54.098717] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 54.098738] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 54.210797] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 54.210816] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 54.210831] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 54.210847] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 54.210850] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 [ 54.210979] ivtv: End initialization [ 107.394904] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 107.594017] ivtv0: Encoder revision: 0x02060039 John _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
