Hi, here the requested info:
ivtv: Start initialization, version 1.3.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22 tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 7734987 tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 0-0050: audio processor is MSP4418 (idx 25) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) msp3400 0-0040: msp3400 supports nicam and radio, mode is autodetect and autoselect ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPG (1024 kB) ivtv0: Registered device vbi8 for decoder VBI (64 kB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1024 kB) ivtv0: Initialized card #0: Hauppauge WinTV PVR-350 ivtv: End initialization Bye, David Arendt Hans Verkuil wrote: > On Monday 14 July 2008 18:02:54 David Arendt wrote: > >> Hi, >> >> Using kernel 2.6.26 I can no longer change channel using mythtv or >> ivtv-tune. 2.6.25.4 >> >> dmesg | grep tuner from 2.6.26: >> >> tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type >> 38) >> >> dmesg | grep tuner from 2.6.25.4 >> >> tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type >> 38) tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) >> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) >> tuner-simple 0-0061: type set to 38 (Philips PAL/SECAM multi >> (FM1216ME MK3)) >> >> Feel free to contact me if you need more info. >> >> Thanks in advance for looking into this. >> >> Bye, >> David Arendt >> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> > > > It would be nice if you could give us all the ivtv initialization > messages, i.e. the part between 'ivtv: Start initialization' > and 'ivtv: End initialization'. > > Anyone else seen this? > > Regards, > > Hans > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
