On Tuesday 15 July 2008 06:03:33 David Arendt wrote:
> Hi,
>
> here the requested info:
>
> ivtv: Start initialization, version 1.3.0
> ivtv0: Initializing card #0
> ivtv0: Autodetected Hauppauge card (cx23415 based)
> ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
> tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 7734987
> tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type
> 38) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L')
> PAL(D/D1/K) (eeprom 0x74) tveeprom 0-0050: audio processor is MSP4418
> (idx 25)
> tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
> tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
> ivtv0: Autodetected Hauppauge WinTV PVR-350
> saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c
> driver #0) saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
> msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
> msp3400 0-0040: msp3400 supports nicam and radio, mode is autodetect
> and autoselect ivtv0: Registered device video0 for encoder MPG (4096
> kB)
> ivtv0: Registered device video32 for encoder YUV (2048 kB)
> ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
> ivtv0: Registered device video24 for encoder PCM (320 kB)
> ivtv0: Registered device radio0 for encoder radio
> ivtv0: Registered device video16 for decoder MPG (1024 kB)
> ivtv0: Registered device vbi8 for decoder VBI (64 kB)
> ivtv0: Registered device vbi16 for decoder VOUT
> ivtv0: Registered device video48 for decoder YUV (1024 kB)
> ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
> ivtv: End initialization
If you run lsmod, do you have the following modules:
tuner
tuner_simple
tuner_types
tda9887
What happens if you modprobe them manually before loading ivtv?
And is this a self-compiled kernel or from some distro? (I suspect the
former).
Regards,
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
