On Wednesday 19 November 2008 02:58:12 Karol Zapolski wrote: > On Tue, Nov 18, 2008 at 2:01 AM, Hans Verkuil <[EMAIL PROTECTED]> wrote: > > On Tuesday 18 November 2008 00:54:16 Karol Marek Zapolski wrote: > > > Hello, > > > > > > I have problems capturing closed captioning while recording > > > video. > > > > > > If I record just cctext without recording video - it looks fine.. > > > > > > However recording video and cctext gives me broken text.. > > > > > > It looks like it's missing letters.. > > > > > > I tried various drivers version under various kernels (I'm using > > > fedora) > > > > It's fixed in kernel 2.6.27. > > > > Regards, > > > > Hans > > Hans, > > I'm still experiencing same problems with 2.6.27 kernel
Hmm, no one else ever reported similar problems so this surprises me. It was tested pretty thoroughly at the time. Can you try with the 'bleeding edge' driver? Instructions are here: http://www.ivtvdriver.org/index.php/Download#Bleeding_Edge_driver What sort of PC do you have? In particular, which chipset does it have? Regards, Hans > > If needed I can provide root ssh access to one of my servers for > testing/dev purpouses.. > > # uname -rv > 2.6.27.5-37.fc9.x86_64 #1 SMP Wed Nov 12 18:31:37 EST 2008 > > # dmesg > Linux video capture interface: v2.00 > ivtv: Start initialization, version 1.4.0 > ivtv0: Initializing card #0 > ivtv0: Autodetected Hauppauge card (cx23416 based) > ivtv 0000:0f:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > tveeprom 1-0050: Hauppauge model 25012, rev C5B6, serial# 9966052 > tveeprom 1-0050: tuner model is Philips FM1236 MK5 (idx 116, type 43) > tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 1-0050: audio processor is CX25843 (idx 37) > tveeprom 1-0050: decoder processor is CX25843 (idx 30) > tveeprom 1-0050: has radio > ivtv0: Autodetected Hauppauge WinTV PVR-150 > cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > tda9887 1-0043: creating new instance > tda9887 1-0043: tda988[5/6/7] found > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > tuner-simple 1-0061: creating new instance > tuner-simple 1-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or > FM1236/F)) > firmware: requesting v4l-cx25840.fw > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > ivtv0: Registered device video0 for encoder MPG (4096 kB) > ivtv0: Registered device video32 for encoder YUV (2048 kB) > ivtv0: Registered device vbi0 for encoder VBI (1024 kB) > ivtv0: Registered device video24 for encoder PCM (320 kB) > ivtv0: Registered device radio0 for encoder radio > ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 > ivtv1: Initializing card #1 > ivtv1: Autodetected Hauppauge card (cx23416 based) > ivtv 0000:0f:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > ivtv1: Unreasonably low latency timer, setting to 64 (was 32) > tveeprom 2-0050: Hauppauge model 25012, rev C568, serial# 9935242 > tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) > tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 2-0050: audio processor is CX25843 (idx 37) > tveeprom 2-0050: decoder processor is CX25843 (idx 30) > tveeprom 2-0050: has radio > ivtv1: Autodetected Hauppauge WinTV PVR-150 > cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1) > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) > tda9887 2-0043: creating new instance > tda9887 2-0043: tda988[5/6/7] found > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) > tuner-simple 2-0061: creating new instance > tuner-simple 2-0061: type set to 47 (LG NTSC (TAPE series)) > firmware: requesting v4l-cx25840.fw > cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > ivtv1: Registered device video1 for encoder MPG (4096 kB) > ivtv1: Registered device video33 for encoder YUV (2048 kB) > ivtv1: Registered device vbi1 for encoder VBI (1024 kB) > ivtv1: Registered device video25 for encoder PCM (320 kB) > ivtv1: Registered device radio1 for encoder radio > ivtv1: Initialized card #1: Hauppauge WinTV PVR-150 > > cctext : > :bad one > > <cut> > CHECK OUT GREGG. > (NeNe) > OH, I LOVE THAT LOOK. > HE LIKE A GA > (Gregg) > I > I THINIT'S EXCELLENT > FOR THE WOMEN > WHO WILLE BENEFITING > FR THE FOUNDATION. > </cut> > > :good one > > <cut> > CHECK OUT GREGG. > (NeNe) > OH, I LOVE THAT LOOK. > HE LIKE A GAY PIRATE. > (Gregg) > I THINK IT'S A FANTASTIC > OPPORTUNITY FOR HER. > I THINK IT'S EXCELLENT > FOR THE WOMEN > WHO WILL BE BENEFITING > FROM THE FOUNDATION. > LET ME SEE THAT. > </cut> > > Regards > Karol Zapolski _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
