On Wed, Nov 19, 2008 at 2:18 AM, Hans Verkuil <[EMAIL PROTECTED]> wrote:
> On Wednesday 19 November 2008 02:58:12 Karol Zapolski wrote: > > On Tue, Nov 18, 2008 at 2:01 AM, Hans Verkuil <[EMAIL PROTECTED]> > wrote: > > > On Tuesday 18 November 2008 00:54:16 Karol Marek Zapolski wrote: > > > > Hello, > > > > > > > > I have problems capturing closed captioning while recording > > > > video. > > > > > > > > If I record just cctext without recording video - it looks fine.. > > > > > > > > However recording video and cctext gives me broken text.. > > > > > > > > It looks like it's missing letters.. > > > > > > > > I tried various drivers version under various kernels (I'm using > > > > fedora) > > > > > > It's fixed in kernel 2.6.27. > > > > > > Regards, > > > > > > Hans > > > > Hans, > > > > I'm still experiencing same problems with 2.6.27 kernel > > Hmm, no one else ever reported similar problems so this surprises me. It > was tested pretty thoroughly at the time. > > Can you try with the 'bleeding edge' driver? Instructions are here: > http://www.ivtvdriver.org/index.php/Download#Bleeding_Edge_driver > > What sort of PC do you have? In particular, which chipset does it have? > > Regards, > > Hans It still the same thing - I used latest firmware and drivers as you recomended The machine has on Supermicro motherboard, 2GB of RAM, 4 x 500GB drives Raid5 and 4 PVR-150 cards # lspci lspci 00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub (rev c0) 00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port (rev c0) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01) 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 09:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A (rev 09) 09:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A (rev 09) 0d:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) 0e:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 0f:00.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics Innovation) Volari Z7 0f:03.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 0f:04.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 0f:05.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 0f:06.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Regards Karol Zapolski > > > > > > If needed I can provide root ssh access to one of my servers for > > testing/dev purpouses.. > > > > # uname -rv > > 2.6.27.5-37.fc9.x86_64 #1 SMP Wed Nov 12 18:31:37 EST 2008 > > > > # dmesg > > Linux video capture interface: v2.00 > > ivtv: Start initialization, version 1.4.0 > > ivtv0: Initializing card #0 > > ivtv0: Autodetected Hauppauge card (cx23416 based) > > ivtv 0000:0f:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 > > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > tveeprom 1-0050: Hauppauge model 25012, rev C5B6, serial# 9966052 > > tveeprom 1-0050: tuner model is Philips FM1236 MK5 (idx 116, type 43) > > tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) > > tveeprom 1-0050: audio processor is CX25843 (idx 37) > > tveeprom 1-0050: decoder processor is CX25843 (idx 30) > > tveeprom 1-0050: has radio > > ivtv0: Autodetected Hauppauge WinTV PVR-150 > > cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) > > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > > tda9887 1-0043: creating new instance > > tda9887 1-0043: tda988[5/6/7] found > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > > tuner-simple 1-0061: creating new instance > > tuner-simple 1-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or > > FM1236/F)) > > firmware: requesting v4l-cx25840.fw > > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > > ivtv0: Registered device video0 for encoder MPG (4096 kB) > > ivtv0: Registered device video32 for encoder YUV (2048 kB) > > ivtv0: Registered device vbi0 for encoder VBI (1024 kB) > > ivtv0: Registered device video24 for encoder PCM (320 kB) > > ivtv0: Registered device radio0 for encoder radio > > ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 > > ivtv1: Initializing card #1 > > ivtv1: Autodetected Hauppauge card (cx23416 based) > > ivtv 0000:0f:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > ivtv1: Unreasonably low latency timer, setting to 64 (was 32) > > tveeprom 2-0050: Hauppauge model 25012, rev C568, serial# 9935242 > > tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) > > tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) > > tveeprom 2-0050: audio processor is CX25843 (idx 37) > > tveeprom 2-0050: decoder processor is CX25843 (idx 30) > > tveeprom 2-0050: has radio > > ivtv1: Autodetected Hauppauge WinTV PVR-150 > > cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1) > > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) > > tda9887 2-0043: creating new instance > > tda9887 2-0043: tda988[5/6/7] found > > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) > > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) > > tuner-simple 2-0061: creating new instance > > tuner-simple 2-0061: type set to 47 (LG NTSC (TAPE series)) > > firmware: requesting v4l-cx25840.fw > > cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > > ivtv1: Registered device video1 for encoder MPG (4096 kB) > > ivtv1: Registered device video33 for encoder YUV (2048 kB) > > ivtv1: Registered device vbi1 for encoder VBI (1024 kB) > > ivtv1: Registered device video25 for encoder PCM (320 kB) > > ivtv1: Registered device radio1 for encoder radio > > ivtv1: Initialized card #1: Hauppauge WinTV PVR-150 > > > > cctext : > > :bad one > > > > <cut> > > CHECK OUT GREGG. > > (NeNe) > > OH, I LOVE THAT LOOK. > > HE LIKE A GA > > (Gregg) > > I > > I THINIT'S EXCELLENT > > FOR THE WOMEN > > WHO WILLE BENEFITING > > FR THE FOUNDATION. > > </cut> > > > > :good one > > > > <cut> > > CHECK OUT GREGG. > > (NeNe) > > OH, I LOVE THAT LOOK. > > HE LIKE A GAY PIRATE. > > (Gregg) > > I THINK IT'S A FANTASTIC > > OPPORTUNITY FOR HER. > > I THINK IT'S EXCELLENT > > FOR THE WOMEN > > WHO WILL BE BENEFITING > > FROM THE FOUNDATION. > > LET ME SEE THAT. > > </cut> > > > > Regards > > Karol Zapolski > > >
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
