On Thursday 20 November 2008 17:06:36 Karol Marek Zapolski wrote:
> On Thu, Nov 20, 2008 at 2:27 AM, Hans Verkuil <[EMAIL PROTECTED]>
wrote:
> > On Wednesday 19 November 2008 20:32:04 Karol Zapolski wrote:
> > > On Wed, Nov 19, 2008 at 2:18 AM, Hans Verkuil
> > > <[EMAIL PROTECTED]>
> >
> > wrote:
> > > > On Wednesday 19 November 2008 02:58:12 Karol Zapolski wrote:
> > > > > On Tue, Nov 18, 2008 at 2:01 AM, Hans Verkuil
> > > > > <[EMAIL PROTECTED]>
> > > >
> > > > wrote:
> > > > > > On Tuesday 18 November 2008 00:54:16 Karol Marek Zapolski
wrote:
> > > > > > > Hello,
> > > > > > >
> > > > > > > I have problems capturing closed captioning while
> > > > > > > recording video.
> > > > > > >
> > > > > > > If I record just cctext without recording video - it
> > > > > > > looks fine..
> > > > > > >
> > > > > > > However recording video and cctext gives me broken text..
> > > > > > >
> > > > > > > It looks like it's missing letters..
> > > > > > >
> > > > > > > I tried various drivers version under various kernels
> > > > > > > (I'm using fedora)
> > > > > >
> > > > > > It's fixed in kernel 2.6.27.
> > > > > >
> > > > > > Regards,
> > > > > >
> > > > > > Hans
> > > > >
> > > > > Hans,
> > > > >
> > > > > I'm still experiencing same problems with 2.6.27 kernel
> > > >
> > > > Hmm, no one else ever reported similar problems so this
> > > > surprises me. It was tested pretty thoroughly at the time.
> > > >
> > > > Can you try with the 'bleeding edge' driver? Instructions are
> > > > here:
> > > > http://www.ivtvdriver.org/index.php/Download#Bleeding_Edge_driv
> > > >er
> > > >
> > > > What sort of PC do you have? In particular, which chipset does
> > > > it have?
> > > >
> > > > Regards,
> > > >
> > > > Hans
> > >
> > > It still the same thing - I used latest firmware and drivers as
> > > you recomended
> > >
> > > The machine has on Supermicro motherboard, 2GB of RAM, 4 x 500GB
> > > drives Raid5
> > > and 4 PVR-150 cards
> >
> > How do you test this?
> >
> > Can you also try to do this:
> >
> > In one shell run:
> >
> > vbi -d /dev/vbi0
> >
> > (the vbi tool is part of the ivtv-utils:
> > http://dl.ivtvdriver.org/ivtv/archive/1.3.x/ivtv-utils-1.3.0.tar.gz
> >)
> >
> > In the other shell run:
> >
> > cat /dev/video0 >/dev/null
> >
> > And does this problem happen for all four PVR-150 cards?
> >
> > If you still experience the same problems with the above test, then
> > I'm afraid I need an account. I'm not guaranteeing anything, BTW.
> > VBI is really difficult to implement and it's rather depressing for
> > me to still have cases where it is apparently not working well.
> >
> > Regards,
> >
> > Hans
>
> Hans,
>
> My apologies... It works great with Your vbi tool - I did not know
> about this tool.
> I was checking it with zvbi-ntsc-cc...
>
> And just for the records it was happening on all 4 cards (btw. I have
> more then 1 machine with haupauge cards)
>
> Anyway - If you need account with one or multiple haupauge cards
> (pvr150/350/500 or hvr1600/1800/1250 and other ) I will be happy to
> give it to you
>
> Thank you very much for your help...
You're welcome. You've made my day, I really wasn't looking forward to
wrestling with this yet again! :-)
Regards,
Hans
>
> Best regards
> Karol Zapolski
>
> > > # lspci
> > > lspci
> > > 00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory
> > > Controller Hub (rev c0)
> > > 00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express
> > > Root Port (rev c0)
> > > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
> > > Express Port 1 (rev 01)
> > > 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7
> > > Family) PCI Express Port 5 (rev 01)
> > > 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7
> > > Family) PCI Express Port 6 (rev 01)
> > > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family)
> > > USB UHCI Controller #1 (rev 01)
> > > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family)
> > > USB UHCI Controller #2 (rev 01)
> > > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family)
> > > USB UHCI Controller #3 (rev 01)
> > > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family)
> > > USB UHCI Controller #4 (rev 01)
> > > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family)
> > > USB2 EHCI Controller (rev 01)
> > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> > > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family)
> > > LPC Interface Bridge (rev 01)
> > > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
> > > Controller (rev 01)
> > > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7
> > > Family) SATA IDE Controller (rev 01)
> > > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus
> > > Controller (rev 01)
> > > 09:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI
> > > Bridge A (rev 09)
> > > 09:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt
> > > Controller A (rev 09)
> > > 0d:00.0 Ethernet controller: Intel Corporation 82573E Gigabit
> > > Ethernet Controller (Copper) (rev 03)
> > > 0e:00.0 Ethernet controller: Intel Corporation 82573L Gigabit
> > > Ethernet Controller
> > > 0f:00.0 VGA compatible controller: XGI Technology Inc. (eXtreme
> > > Graphics Innovation) Volari Z7
> > > 0f:03.0 Multimedia video controller: Internext Compression Inc
> > > iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
> > > 0f:04.0 Multimedia video controller: Internext Compression Inc
> > > iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
> > > 0f:05.0 Multimedia video controller: Internext Compression Inc
> > > iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
> > > 0f:06.0 Multimedia video controller: Internext Compression Inc
> > > iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
> > >
> > >
> > > Regards
> > > Karol Zapolski
> > >
> > > > > If needed I can provide root ssh access to one of my servers
> > > > > for testing/dev purpouses..
> > > > >
> > > > > # uname -rv
> > > > > 2.6.27.5-37.fc9.x86_64 #1 SMP Wed Nov 12 18:31:37 EST 2008
> > > > >
> > > > > # dmesg
> > > > > Linux video capture interface: v2.00
> > > > > ivtv: Start initialization, version 1.4.0
> > > > > ivtv0: Initializing card #0
> > > > > ivtv0: Autodetected Hauppauge card (cx23416 based)
> > > > > ivtv 0000:0f:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> > > > > ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> > > > > tveeprom 1-0050: Hauppauge model 25012, rev C5B6, serial#
> > > > > 9966052 tveeprom 1-0050: tuner model is Philips FM1236 MK5
> > > > > (idx 116, type 43) tveeprom 1-0050: TV standards NTSC(M)
> > > > > (eeprom 0x08) tveeprom 1-0050: audio processor is CX25843
> > > > > (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx
> > > > > 30) tveeprom 1-0050: has radio
> > > > > ivtv0: Autodetected Hauppauge WinTV PVR-150
> > > > > cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
> > > > > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
> > > > > tda9887 1-0043: creating new instance
> > > > > tda9887 1-0043: tda988[5/6/7] found
> > > > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > > > > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > > > > tuner-simple 1-0061: creating new instance
> > > > > tuner-simple 1-0061: type set to 43 (Philips NTSC MK3
> > > > > (FM1236MK3 or FM1236/F))
> > > > > firmware: requesting v4l-cx25840.fw
> > > > > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > > > > ivtv0: Registered device video0 for encoder MPG (4096 kB)
> > > > > ivtv0: Registered device video32 for encoder YUV (2048 kB)
> > > > > ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
> > > > > ivtv0: Registered device video24 for encoder PCM (320 kB)
> > > > > ivtv0: Registered device radio0 for encoder radio
> > > > > ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
> > > > > ivtv1: Initializing card #1
> > > > > ivtv1: Autodetected Hauppauge card (cx23416 based)
> > > > > ivtv 0000:0f:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> > > > > ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
> > > > > tveeprom 2-0050: Hauppauge model 25012, rev C568, serial#
> > > > > 9935242 tveeprom 2-0050: tuner model is LG TAPE H001F MK3
> > > > > (idx 68, type 47) tveeprom 2-0050: TV standards NTSC(M)
> > > > > (eeprom 0x08) tveeprom 2-0050: audio processor is CX25843
> > > > > (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx
> > > > > 30) tveeprom 2-0050: has radio
> > > > > ivtv1: Autodetected Hauppauge WinTV PVR-150
> > > > > cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1)
> > > > > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
> > > > > tda9887 2-0043: creating new instance
> > > > > tda9887 2-0043: tda988[5/6/7] found
> > > > > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> > > > > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
> > > > > tuner-simple 2-0061: creating new instance
> > > > > tuner-simple 2-0061: type set to 47 (LG NTSC (TAPE series))
> > > > > firmware: requesting v4l-cx25840.fw
> > > > > cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > > > > ivtv1: Registered device video1 for encoder MPG (4096 kB)
> > > > > ivtv1: Registered device video33 for encoder YUV (2048 kB)
> > > > > ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
> > > > > ivtv1: Registered device video25 for encoder PCM (320 kB)
> > > > > ivtv1: Registered device radio1 for encoder radio
> > > > > ivtv1: Initialized card #1: Hauppauge WinTV PVR-150
> > > > >
> > > > > cctext :
> > > > > :bad one
> > > > >
> > > > > <cut>
> > > > > CHECK OUT GREGG.
> > > > > (NeNe)
> > > > > OH, I LOVE THAT LOOK.
> > > > > HE LIKE A GA
> > > > > (Gregg)
> > > > > I
> > > > > I THINIT'S EXCELLENT
> > > > > FOR THE WOMEN
> > > > > WHO WILLE BENEFITING
> > > > > FR THE FOUNDATION.
> > > > > </cut>
> > > > >
> > > > > :good one
> > > > >
> > > > > <cut>
> > > > > CHECK OUT GREGG.
> > > > > (NeNe)
> > > > > OH, I LOVE THAT LOOK.
> > > > > HE LIKE A GAY PIRATE.
> > > > > (Gregg)
> > > > > I THINK IT'S A FANTASTIC
> > > > > OPPORTUNITY FOR HER.
> > > > > I THINK IT'S EXCELLENT
> > > > > FOR THE WOMEN
> > > > > WHO WILL BE BENEFITING
> > > > > FROM THE FOUNDATION.
> > > > > LET ME SEE THAT.
> > > > > </cut>
> > > > >
> > > > > Regards
> > > > > Karol Zapolski
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
