On Wednesday 19 November 2008 20:32:04 Karol Zapolski wrote: > On Wed, Nov 19, 2008 at 2:18 AM, Hans Verkuil <[EMAIL PROTECTED]> wrote: > > On Wednesday 19 November 2008 02:58:12 Karol Zapolski wrote: > > > On Tue, Nov 18, 2008 at 2:01 AM, Hans Verkuil > > > <[EMAIL PROTECTED]> > > > > wrote: > > > > On Tuesday 18 November 2008 00:54:16 Karol Marek Zapolski wrote: > > > > > Hello, > > > > > > > > > > I have problems capturing closed captioning while recording > > > > > video. > > > > > > > > > > If I record just cctext without recording video - it looks > > > > > fine.. > > > > > > > > > > However recording video and cctext gives me broken text.. > > > > > > > > > > It looks like it's missing letters.. > > > > > > > > > > I tried various drivers version under various kernels (I'm > > > > > using fedora) > > > > > > > > It's fixed in kernel 2.6.27. > > > > > > > > Regards, > > > > > > > > Hans > > > > > > Hans, > > > > > > I'm still experiencing same problems with 2.6.27 kernel > > > > Hmm, no one else ever reported similar problems so this surprises > > me. It was tested pretty thoroughly at the time. > > > > Can you try with the 'bleeding edge' driver? Instructions are here: > > http://www.ivtvdriver.org/index.php/Download#Bleeding_Edge_driver > > > > What sort of PC do you have? In particular, which chipset does it > > have? > > > > Regards, > > > > Hans > > It still the same thing - I used latest firmware and drivers as you > recomended > > The machine has on Supermicro motherboard, 2GB of RAM, 4 x 500GB > drives Raid5 > and 4 PVR-150 cards
How do you test this? Can you also try to do this: In one shell run: vbi -d /dev/vbi0 (the vbi tool is part of the ivtv-utils: http://dl.ivtvdriver.org/ivtv/archive/1.3.x/ivtv-utils-1.3.0.tar.gz) In the other shell run: cat /dev/video0 >/dev/null And does this problem happen for all four PVR-150 cards? If you still experience the same problems with the above test, then I'm afraid I need an account. I'm not guaranteeing anything, BTW. VBI is really difficult to implement and it's rather depressing for me to still have cases where it is apparently not working well. Regards, Hans > > # lspci > lspci > 00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory > Controller Hub (rev c0) > 00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express > Root Port (rev c0) > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI > Express Port 1 (rev 01) > 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) > PCI Express Port 5 (rev 01) > 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) > PCI Express Port 6 (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #3 (rev 01) > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #4 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 > EHCI Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC > Interface Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE > Controller (rev 01) > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) > SATA IDE Controller (rev 01) > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus > Controller (rev 01) > 09:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI > Bridge A (rev 09) > 09:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt > Controller A (rev 09) > 0d:00.0 Ethernet controller: Intel Corporation 82573E Gigabit > Ethernet Controller (Copper) (rev 03) > 0e:00.0 Ethernet controller: Intel Corporation 82573L Gigabit > Ethernet Controller > 0f:00.0 VGA compatible controller: XGI Technology Inc. (eXtreme > Graphics Innovation) Volari Z7 > 0f:03.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > 0f:04.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > 0f:05.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > 0f:06.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > > > Regards > Karol Zapolski > > > > If needed I can provide root ssh access to one of my servers for > > > testing/dev purpouses.. > > > > > > # uname -rv > > > 2.6.27.5-37.fc9.x86_64 #1 SMP Wed Nov 12 18:31:37 EST 2008 > > > > > > # dmesg > > > Linux video capture interface: v2.00 > > > ivtv: Start initialization, version 1.4.0 > > > ivtv0: Initializing card #0 > > > ivtv0: Autodetected Hauppauge card (cx23416 based) > > > ivtv 0000:0f:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 > > > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > > tveeprom 1-0050: Hauppauge model 25012, rev C5B6, serial# 9966052 > > > tveeprom 1-0050: tuner model is Philips FM1236 MK5 (idx 116, type > > > 43) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) > > > tveeprom 1-0050: audio processor is CX25843 (idx 37) > > > tveeprom 1-0050: decoder processor is CX25843 (idx 30) > > > tveeprom 1-0050: has radio > > > ivtv0: Autodetected Hauppauge WinTV PVR-150 > > > cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) > > > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > > > tda9887 1-0043: creating new instance > > > tda9887 1-0043: tda988[5/6/7] found > > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > > > tuner-simple 1-0061: creating new instance > > > tuner-simple 1-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 > > > or FM1236/F)) > > > firmware: requesting v4l-cx25840.fw > > > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > > > ivtv0: Registered device video0 for encoder MPG (4096 kB) > > > ivtv0: Registered device video32 for encoder YUV (2048 kB) > > > ivtv0: Registered device vbi0 for encoder VBI (1024 kB) > > > ivtv0: Registered device video24 for encoder PCM (320 kB) > > > ivtv0: Registered device radio0 for encoder radio > > > ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 > > > ivtv1: Initializing card #1 > > > ivtv1: Autodetected Hauppauge card (cx23416 based) > > > ivtv 0000:0f:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > > ivtv1: Unreasonably low latency timer, setting to 64 (was 32) > > > tveeprom 2-0050: Hauppauge model 25012, rev C568, serial# 9935242 > > > tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type > > > 47) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) > > > tveeprom 2-0050: audio processor is CX25843 (idx 37) > > > tveeprom 2-0050: decoder processor is CX25843 (idx 30) > > > tveeprom 2-0050: has radio > > > ivtv1: Autodetected Hauppauge WinTV PVR-150 > > > cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1) > > > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) > > > tda9887 2-0043: creating new instance > > > tda9887 2-0043: tda988[5/6/7] found > > > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) > > > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) > > > tuner-simple 2-0061: creating new instance > > > tuner-simple 2-0061: type set to 47 (LG NTSC (TAPE series)) > > > firmware: requesting v4l-cx25840.fw > > > cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > > > ivtv1: Registered device video1 for encoder MPG (4096 kB) > > > ivtv1: Registered device video33 for encoder YUV (2048 kB) > > > ivtv1: Registered device vbi1 for encoder VBI (1024 kB) > > > ivtv1: Registered device video25 for encoder PCM (320 kB) > > > ivtv1: Registered device radio1 for encoder radio > > > ivtv1: Initialized card #1: Hauppauge WinTV PVR-150 > > > > > > cctext : > > > :bad one > > > > > > <cut> > > > CHECK OUT GREGG. > > > (NeNe) > > > OH, I LOVE THAT LOOK. > > > HE LIKE A GA > > > (Gregg) > > > I > > > I THINIT'S EXCELLENT > > > FOR THE WOMEN > > > WHO WILLE BENEFITING > > > FR THE FOUNDATION. > > > </cut> > > > > > > :good one > > > > > > <cut> > > > CHECK OUT GREGG. > > > (NeNe) > > > OH, I LOVE THAT LOOK. > > > HE LIKE A GAY PIRATE. > > > (Gregg) > > > I THINK IT'S A FANTASTIC > > > OPPORTUNITY FOR HER. > > > I THINK IT'S EXCELLENT > > > FOR THE WOMEN > > > WHO WILL BE BENEFITING > > > FROM THE FOUNDATION. > > > LET ME SEE THAT. > > > </cut> > > > > > > Regards > > > Karol Zapolski _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
