Hi Andy, Andy Walls wrote:
> First try: > > 1. (killing the mythbackend) > 2. modprobe -r cx18 > 3. modprobe cx18 > 4. (restart the mythbackend) > > at see if that helps with the audio from the tuner. It did not help. > If it does, could you then try the cx18 driver from this repo: > > http://linuxtv.org/hg/~awalls/cx18-init-debug/ > > and set things up so that > > options cx18 debug=15 > > is set in /etc/modprobe.conf (or whatever you distro uses). I'd like to > see the messages from the initialization of the cx18 driver at boot. > > I'm especially looking for any occurrance of the error messages in this > patch: > > http://linuxtv.org/hg/~awalls/cx18-init-debug/rev/93828c207b80 > > when the driver is loaded automatically at boot-up. Should I still try the cx18-init-debug driver? Or could this indicate a problem with the board? I don't have WinXP on this computer, but I do on the old computer. Perhaps I should see if the board can tune and record channel 29 in WinXP on the old computer? FWIW, when I verified that modprobe -r cx18 did indeed remove the cx18 modules via lsmod, I was surprised to see some cx88 modules. I didn't think the HVR-1600 needed them. Maybe for the IR device? Thanks, Helen _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
