Ten end of this week? When would that be? ;) I think it is important to test regression: does it still work like it should. 2 is quite dificult to repreduce and even within 2 there are multiple states to recover. We'll learn if the recovery is sufficient along the way. But having said that, I'm confident is does. I knew it would be possible, just did not look into this. And when I spoke to a friend, I told me about the atmel datasheet. And with my logic analyser, I could verify my waveform is equal to the one in the datasheet :)
Joep 2009/1/2, Sebastien Lelong <[email protected]>: > I can test this, but probably not before the end of this WE... > What would be the test scenario ? > > 1. make 2 pics talking > 2. while master is sending a packet, reset it > 3. make sure after reset, pics can still talk > > > How would I do 2. ? How did you perform this test ? > > > Seb > > 2009/1/2 Joep Suijs <[email protected]> > > > > > Hi All, > > > > I added some code in i2c software master to clear the i2c bus, > > regardless the state it is in. This is usefull in cases where the > > master gets resets, while communicating with a slave. The slave may > > have been addressed and sending data and that needs recovery. > > > > I tested this with an i2c eeprom and seems to work okay in the way it > > does not cause any problems. Can someone else (Seb?) test this code > > also to make sure it does not cause any new issue's? > > > > I'll intend to add this code for hardware i2c too. > > > > Joep > > > > > > > > > > -- > Sébastien Lelong > http://www.sirloon.net > http://sirbot.org > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
