If you need a real analogic scope ( a russian one) I can send you one, even a french one will be less expensive than the postage....
Vasile On Fri, Mar 5, 2010 at 7:41 AM, vasile surducan <[email protected]> wrote: > NO! > > > On Fri, Mar 5, 2010 at 6:23 AM, Sebastien Lelong < > [email protected]> wrote: > >> Hi guys, >> >> Un-burying this topic, with a pocket DSO from seeedstudio.com: >> >> >> http://www.seeedstudio.com/depot/micro-digital-storage-oscilloscopedso-nano-p-512.html >> >> Only one channel, analog bandwidth 0 - 1MHz, max sample rate 1Msps 12Bits, >> but tiny, and not expensive. >> >> What do you guys think ? Sounds reasonable ? >> >> >> Cheers, >> Seb >> >> >> >> >> 2009/1/16 Joep Suijs <[email protected]> >> >>> Hi Seb, >>> >>> The schematics is on the polish site. Enclosed a PDF. >>> >>> - I used an atmel324 - pin names are the same, numbers are different. >>> - I intend to 'upgrade' the design to support pre-sampling and 128k >>> storage (in stead of 32k) and run at 20 MHz. This means the circuit >>> around the 7400 and 4040's will change a bit and there will be a stack >>> of 4 memory chips - with a decoder on top - on my board. >>> (waiting for the memory to arrive - bought them for just over 10 euro >>> including shipping at ebay). >>> >>> Joep >>> >>> >>> 2009/1/16 Sebastien Lelong <[email protected]>: >>> > Ho Joep, >>> > >>> > Looks nice ! Waiting for schematics ! >>> > >>> > >>> > Seb >>> > >>> > 2009/1/16 Joep Suijs <[email protected]> >>> >> >>> >> Hi Guys, >>> >> >>> >> As mentioned before, we're working on a logic analyser. Hardware is >>> >> atmel-based, programmed in c and pc program is c#. So it is off-topic >>> >> ;) >>> >> >>> >> There has been quite some progress on the C# program and we almost >>> >> duplicated the functions of the original program. See >>> >> http://code.google.com/p/protocolviewer/ for more info. >>> >> >>> >> Joep >>> >> >>> >> >>> > >>> > >>> > >>> > -- >>> > Sébastien Lelong >>> > http://www.sirloon.net >>> > http://sirbot.org >>> > >>> > > >>> > >>> >>> --~--~---------~--~----~------------~-------~--~----~ >>> >>> You received this message because you are subscribed to the Google Groups >>> "jallib" group. >>> To post to this group, send email to [email protected] >>> To unsubscribe from this group, send email to >>> [email protected]<jallib%[email protected]> >>> For more options, visit this group at >>> http://groups.google.com/group/jallib?hl=en >>> -~----------~----~----~----~------~----~------~--~--- >>> >>> >> >> >> -- >> Sébastien Lelong >> http://www.sirloon.net >> http://sirbot.org >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]<jallib%[email protected]> >> . >> For more options, visit this group at >> http://groups.google.com/group/jallib?hl=en. >> > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
