I forgot to say that the main difference is the design himself. Just compare them.
On Jul 9, 6:08 pm, funlw65 <[email protected]> wrote: > Not exactly. Pinguino have RA4 pin connected to positive trace via > LED. Also have a second push-button for "Start Application". It also > have a 5V power regulator on board. The LED on Pinguino signal the > moment when you are in "Run Application" mode. Because is inverse in > this board, it will signal how long board is in boot mode. > > Also, I excluded regulator because must be obligatory present on an > application motherboard because you probably will have a cooling > radiator specific to your application. In this case, you disconnect > the jumper so your microcontroller will have his power from the > motherboard and not from USB as is the case when you breadboard it for > tests. Also, the LED on this board can be disconnected via a jumper. I > can say here are a lot of differences. > > On Jul 9, 5:58 pm, Sebastien Lelong <[email protected]> > wrote: > > > But is it like a Pinguino ? If so, why not directly using Pinguino ? Is it > > because there's no ICSP ? > > > 2010/7/9 vasi vasi <[email protected]> > > > > These are project sources (usable with free version of DipTrace). > > > So, can be improved/modified by anyone. > > > -- > > > Vasi > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "jallib" group. > > > To post to this group, send email to [email protected]. > > > To unsubscribe from this group, send email to > > > [email protected]<jallib%[email protected]> > > > . > > > > For more options, visit this group at > > >http://groups.google.com/group/jallib?hl=en. > > > -- > > Sébastien Lelonghttp://www.sirloon.nethttp://sirbot.org -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
