Hi Matt, Be sure you have a beefy 3.3 volt power supply - the ENC chip draws a lot of current!
Another 18F67J60 board is the nice EDTP 'ethernet mini'. William On Sep 4, 3:52 am, William <[email protected]> wrote: > Hi Matt, > > Just to clarify, if you have a 18F67J60, you already have ethernet > inside (no need for SPI). The ENC chip was intended to allow you to > add ethernet features to an older chip, like the 18F452. > > In my opinion, you'll have plenty of work to get ethernet going, > without having to deal with SPI too. Check out Olimex's PIC-MICRO- > WEB. > > William > > On Sep 1, 8:07 am, mattschinkel <[email protected]> wrote: > > > I believe it just puts the 18F67J60 SPI pins out to the header. From > > the image, you can see that the output pins are labeled. It is also > > international "FREE SHIPPING". > > > At least this way I know for sure that I will have working hardware. > > > Matt. -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
