> Try this... open arp.jal and comment out this line from > arp_read_reply() procedure > -- set network array offset > network_var_offset = 14 I did as you told, but no change
> I did the same but with a cross over cable. I didn't think a straight cable would work. I also replace direct with crossover, but no change > I am thinking however that you will need to change your network > settings. Maybe you did this already, you may need to set your > "default gateway" to 192.168.1.60 > Maybe ARP is trying to send to 192.168.1.1 or whatever your setting > currently is. I change the gateway to 192.168.1.60, still no change It seems on Wireshark Pic broadcasts its MAC adress, but can not process PC's ip or mac address.See below line : 135 765.601823 AsustekC_c6:53:16 HewlettP_e1:e6:6c ARP 192.168.1.60 is at 00:13:d4:c6:53:16 where do you store destination ip and mac addess, 'll try to print on debug screen once it receives a ping request Kutsal On 18 Ocak, 19:06, Sebastien Lelong <[email protected]> wrote: > Maybe that's related to gigabit CAT6 cables with all four twisted pairs ? To > dig... > > Cheers, > Seb > > 2011/1/18 Oliver Seitz <[email protected]> > > > > > > > > > > > > > >Is autonegotiation also about detecting cross-over vs. straight connection > > ? Any link ? I thought it was about half/full duplex and speed. > > > It is. There are different sources stating different things... I feel like > > someone hast to read the standards on that... > > > At least I tried myself and found this quote from > >http://en.wikipedia.org/wiki/Ethernet_over_twisted_pairtrue: > > > "If both devices being connected support 1000BASE-T according to the > > standards, they will connect regardless of the cable being used or how it is > > wired." > > > I found no clear statement that confirmed or denied that this has to do > > with the mandatory auto-negotiation or if there's some magic of a different > > name working. > > > So I now prefer not to keep that statement up, I'm not sure if a gigabit > > port will connect to a less-than-gigabit port trough a straight cable. > > > Greets, > > Kiste > > > -- > > You received this message because you are subscribed to the Google Groups > > "jallib" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]<jallib%[email protected]> > > . > > For more options, visit this group at > >http://groups.google.com/group/jallib?hl=en. > > -- > Sébastien Lelonghttp://www.sirloon.nethttp://sirbot.org -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
