On the PC side, you can open command prompt and type: arp -a
You'll get a list of IP address + MAC address. You should see: 192.168.1.60 00-13-D4-C6-53-16] To clear the arp list, you can type: arp -d * next time you run the PIC, you should see the entry there again. Let me know if you see 192.168.1.60 in the list On the PIC side, go into arp.jal At the end of procedure arp_read_reply(), add these lines. When you run it, you should see the MAC address of your PC. print_crlf(serial_data) serial_data = "-" print_byte_hex(serial_data,network_remote_mac[0]) serial_data = "-" print_byte_hex(serial_data,network_remote_mac[1]) serial_data = "-" print_byte_hex(serial_data,network_remote_mac[2]) serial_data = "-" print_byte_hex(serial_data,network_remote_mac[3]) serial_data = "-" print_byte_hex(serial_data,network_remote_mac[4]) serial_data = "-" print_byte_hex(serial_data,network_remote_mac[5]) serial_data = "-" Please also send me a screen shot of the full ARP request and also a reply in wireshark. Matt. -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
