Hello Rob, i can try with this glcd: http://www.gotronic.fr/doc/opto/03207.pdf
and with Proteus, a very good simulator. : http://www.labcenter.com/products/vsm_overview.cfm Regards, Enzo On 23 nov, 21:14, Rob Hamerling <[email protected]> wrote: > Matt, and others using glcd libraries. > > I've been experimenting with a glcd with KS0108 chips and thought it > necessary to make some changes. > > Since I found not a single sample using the glcd_ks0108 library I had a > pretty hard time to find out how to use it, but I think I have it under > control now. I have changed the timing a little, a.o. replacing NOPs > with _used_delay() and I did some code optimisation and extended some > comments. > > I made also some changes in the glcd_common library, in particular for > issue #168, but also some code and comment improvements. > Furthermore I implemented 'clipping' in the glcd_ellipse procedure (made > a separate procedure to reduce duplicate code). Drawing whole ellipses > larger than the display shows only the parts which fit on the physical > display. > Possibly also some other procedures may require clipping to prevent > drawing pixels on unexpected places > > Unfortunately I have no other glcd than the one with KS0108 chips, so > before I commit these changes I would like to ask a volunteer to test my > changes with other types of glcds. Who??? > > Regards, Rob. > > -- > R. Hamerling, Netherlands ---http://www.robh.nl -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
