Thanks Rob

 

Genieten bestaat dankzij off-dagen!

 

Van: RobJ
Verzonden: zaterdag 14 maart 2020 13:22
Aan: jallib
Onderwerp: [jallib] Microchip Snap programmer/debugger discount

 

Hello all,

 

This is for your information.

 

Until the end of March you can purchase the inexpensive Snap programmer/debugger from Microchip with 50% discount , see:

https://www.microchip.com/Developmenttools/ProductDetails/PG164100

 

Why purchase this? When testing new device files for new samples I noticed that I am not able to program a new sample with the PicKit3.

 

It was not officially confirmed by Microchip but it might be that the PicKit3 will not support newer chips. This may of course not be a problem for you if you are OK with the current set the PicKit3 can program.

 

The Snap programmer/debugger is capable of programming almost all MCU's, where the more expensive Pickit4 can program all.

 

I do not know that 'almost' means.

 

Anyway I ordered one to see if I am able to program a new PIC18F47Q43 which I currently cannot program with my PicKit3.

 

I will let you know if the Snap programmer solves this problem.

 

Kind regards,


Rob

--
You received this message because you are subscribed to the Google Groups "jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/84b028a8-4f8c-4247-9f1b-5c5d2871d2db%40googlegroups.com.

 

--
You received this message because you are subscribed to the Google Groups "jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/5e6f91d5.1c69fb81.2d94c.1451%40mx.google.com.

Reply via email to