Maybe good to know. I changed all sample files (using a script of Rob Hamerling 🙂) standard to Low Voltage Programming (LVP ENABLED) since that seems to become the default. This will be available in the next bee-packages.
Some older PICs do not support LVP so you still need a Pickit2 or 3 for these devices. Note that if you have already been programming your PIC with High Voltage, you need a PicKit2 of 3 to set it back to Low Voltage Programming since an LVP programmer (like the Snap) cannot do that. A virgin PIC with LVP is by default in LVP mode. Enjoy! ________________________________ Van: [email protected] <[email protected]> namens Ptr <[email protected]> Verzonden: maandag 16 maart 2020 15:40 Aan: [email protected] <[email protected]> Onderwerp: RE: [jallib] Microchip Snap programmer/debugger discount Thanks Rob Genieten bestaat dankzij off-dagen! Van: RobJ<mailto:[email protected]> Verzonden: zaterdag 14 maart 2020 13:22 Aan: jallib<mailto:[email protected]> Onderwerp: [jallib] Microchip Snap programmer/debugger discount Hello all, This is for your information. Until the end of March you can purchase the inexpensive Snap programmer/debugger from Microchip with 50% discount , see: https://www.microchip.com/Developmenttools/ProductDetails/PG164100 Why purchase this? When testing new device files for new samples I noticed that I am not able to program a new sample with the PicKit3. It was not officially confirmed by Microchip but it might be that the PicKit3 will not support newer chips. This may of course not be a problem for you if you are OK with the current set the PicKit3 can program. The Snap programmer/debugger is capable of programming almost all MCU's, where the more expensive Pickit4 can program all. I do not know that 'almost' means. Anyway I ordered one to see if I am able to program a new PIC18F47Q43 which I currently cannot program with my PicKit3. I will let you know if the Snap programmer solves this problem. Kind regards, Rob -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/84b028a8-4f8c-4247-9f1b-5c5d2871d2db%40googlegroups.com<https://groups.google.com/d/msgid/jallib/84b028a8-4f8c-4247-9f1b-5c5d2871d2db%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/5e6f91d5.1c69fb81.2d94c.1451%40mx.google.com<https://groups.google.com/d/msgid/jallib/5e6f91d5.1c69fb81.2d94c.1451%40mx.google.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/AM0PR07MB4948BDBE8A5193A18CFBFEA7E6F90%40AM0PR07MB4948.eurprd07.prod.outlook.com.
