I just ordered a snap paying a higher shipping fee. If you order now applying MCHPFREE you can get SNAP for just 7.47USD including shipping.
Kind regards, Sunish On Wed, Mar 18, 2020 at 11:16 PM RobJ <[email protected]> wrote: > Hello all, > > Today I received the Snap programmer and did some tests. This programmer > was indeed able to program a PIC18F47Q43 which the PicKit3 could not, When > you use MPLAB IPE and you have both a PicKit3 and a Snap connected to your > PC you can select one of the two programmers in IPE. > > The PIC was programmed with LVP ENABLED. As mentioned earlier, all sample > files in the upcoming release have been changed to LVP ENABLED as default. > > Kind regards, > > Rob > > > On Monday, March 16, 2020 at 7:41:46 PM UTC+1, RobJ wrote: >> >> Maybe good to know. I changed all sample files (using a script of Rob >> Hamerling 🙂) standard to Low Voltage Programming (LVP ENABLED) since >> that seems to become the default. This will be available in the next >> bee-packages. >> >> Some older PICs do not support LVP so you still need a Pickit2 or 3 for >> these devices. >> >> Note that if you have already been programming your PIC with High >> Voltage, you need a PicKit2 of 3 to set it back to Low Voltage Programming >> since an LVP programmer (like the Snap) cannot do that. >> >> A virgin PIC with LVP is by default in LVP mode. >> >> Enjoy! >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens Ptr < >> [email protected]> >> *Verzonden:* maandag 16 maart 2020 15:40 >> *Aan:* [email protected] <[email protected]> >> *Onderwerp:* RE: [jallib] Microchip Snap programmer/debugger discount >> >> >> Thanks Rob >> >> >> >> Genieten bestaat dankzij off-dagen! >> >> >> >> *Van: *RobJ <[email protected]> >> *Verzonden: *zaterdag 14 maart 2020 13:22 >> *Aan: *jallib <[email protected]> >> *Onderwerp: *[jallib] Microchip Snap programmer/debugger discount >> >> >> >> Hello all, >> >> >> >> This is for your information. >> >> >> >> Until the end of March you can purchase the inexpensive Snap >> programmer/debugger from Microchip with 50% discount , see: >> >> https://www.microchip.com/Developmenttools/ProductDetails/PG164100 >> >> >> >> Why purchase this? When testing new device files for new samples I >> noticed that I am not able to program a new sample with the PicKit3. >> >> >> >> It was not officially confirmed by Microchip but it might be that the >> PicKit3 will not support newer chips. This may of course not be a problem >> for you if you are OK with the current set the PicKit3 can program. >> >> >> >> The Snap programmer/debugger is capable of programming almost all MCU's, >> where the more expensive Pickit4 can program all. >> >> >> >> I do not know that 'almost' means. >> >> >> >> Anyway I ordered one to see if I am able to program a new PIC18F47Q43 >> which I currently cannot program with my PicKit3. >> >> >> >> I will let you know if the Snap programmer solves this problem. >> >> >> >> Kind regards, >> >> >> Rob >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/84b028a8-4f8c-4247-9f1b-5c5d2871d2db%40googlegroups.com >> <https://groups.google.com/d/msgid/jallib/84b028a8-4f8c-4247-9f1b-5c5d2871d2db%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/5e6f91d5.1c69fb81.2d94c.1451%40mx.google.com >> <https://groups.google.com/d/msgid/jallib/5e6f91d5.1c69fb81.2d94c.1451%40mx.google.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/6a63bcc1-3d51-493e-8217-8ea8dbb9de31%40googlegroups.com > <https://groups.google.com/d/msgid/jallib/6a63bcc1-3d51-493e-8217-8ea8dbb9de31%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/CAFGw2pFQvFe8Zow3bD2xEwA1pq-tPD_xRy4S1u-yKi8J%3D_WxAg%40mail.gmail.com.
