Have changed with attached basic. Same result. Changed 325 for 324 same result
Op vrijdag 3 november 2023 om 21:27:23 UTC+1 schreef Hans van Veldhuizen: > Hi Rob, > If I add this before the original forever loop then just servo 2 moves. > Changed servo's same result > forever loop > > servo_move(60,1) > servo_move(60,2) > delay_1S(2) > > servo_move(150,1) > servo_move(150,2) > delay_1S(2) > > end loop > > Op vrijdag 3 november 2023 om 19:11:13 UTC+1 schreef Rob CJ: > >> Hi Hans, >> >> I cannot see any errors. So the data is received correctly but the >> servo's do not work? >> >> Have you tried to get the servo's working without the receive routines? >> So just hard-code some values to see if the servo's are working? >> >> Kind regards, >> >> Rob >> >> >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens Hans van >> Veldhuizen <[email protected]> >> *Verzonden:* donderdag 2 november 2023 13:09 >> *Aan:* jallib <[email protected]> >> *Onderwerp:* [jallib] Camera_Gimbal >> >> Hello all, >> My question again. I'm trying to make a two-way camera Gimbal. I have >> modified working programs. The transmitter now has two ADC inputs and the >> receiver must control two servos. The signals arrive correctly at the >> receiver in fits and starts. I can't get the servos to work. Attached are >> the two files. >> Please respond again, >> regards >> Hans >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/ff970ccd-ffb8-473f-991f-1441f768da3cn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/ff970ccd-ffb8-473f-991f-1441f768da3cn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/8093b573-4fb8-492a-ab0f-5db352424ffcn%40googlegroups.com.
16F15325_ GIMBAL_ontvanger+_yy.jal
Description: Binary data
