Hi Hans, The only difference that I see is the looptime.
Instead of 1 second it is 1 ms but it depends on how fast the data is received. If that is too fast will that disturb the servo movement? Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens Hans van Veldhuizen <[email protected]> Verzonden: vrijdag 3 november 2023 22:13 Aan: jallib <[email protected]> Onderwerp: Re: [jallib] Camera_Gimbal Have changed with attached basic. Same result. Changed 325 for 324 same result Op vrijdag 3 november 2023 om 21:27:23 UTC+1 schreef Hans van Veldhuizen: Hi Rob, If I add this before the original forever loop then just servo 2 moves. Changed servo's same result forever loop servo_move(60,1) servo_move(60,2) delay_1S(2) servo_move(150,1) servo_move(150,2) delay_1S(2) end loop Op vrijdag 3 november 2023 om 19:11:13 UTC+1 schreef Rob CJ: Hi Hans, I cannot see any errors. So the data is received correctly but the servo's do not work? Have you tried to get the servo's working without the receive routines? So just hard-code some values to see if the servo's are working? Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens Hans van Veldhuizen <[email protected]> Verzonden: donderdag 2 november 2023 13:09 Aan: jallib <[email protected]> Onderwerp: [jallib] Camera_Gimbal Hello all, My question again. I'm trying to make a two-way camera Gimbal. I have modified working programs. The transmitter now has two ADC inputs and the receiver must control two servos. The signals arrive correctly at the receiver in fits and starts. I can't get the servos to work. Attached are the two files. Please respond again, regards Hans -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/ff970ccd-ffb8-473f-991f-1441f768da3cn%40googlegroups.com<https://groups.google.com/d/msgid/jallib/ff970ccd-ffb8-473f-991f-1441f768da3cn%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/8093b573-4fb8-492a-ab0f-5db352424ffcn%40googlegroups.com<https://groups.google.com/d/msgid/jallib/8093b573-4fb8-492a-ab0f-5db352424ffcn%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB16377D53B002C26F3577CD5DE6A4A%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.
