Hi Rich, Below are steps on turning the Tab Control off through Speech & Sound Schemes.
1. Press Insert / Jaws key + 6, on the number row above the main keyboare or, press Insert / Jaws key + F2, to open the Jaws Manager, Press the letter S, until you hear Jaws read Settings Center, & press enter. 2. Press control, shift, + D, for the Settings Center Default All Applications. 3. Arrow down to, Speech & Sound Schemes, & press right arrow to open. 4. Arrow down to Modify Schemes, & press the spacebar, not enter. Pressing enter will take you out of the Settings Center. 5. Tab 2 times to, edit selected scheme button, & press the spacebar. 6. You will hear Modify Schemes... General page Scheme Description, press shift + Tab 1 time, to be on theGenerl tab. 7. Right Arrow 1 time to the Control Type Tab. 8. Tab 1 time to, List View, Controls Behavior..., press the letter T, to take you to Tab Control. 9. Tab 1 time to a group of radio buttons, arrow down to, ignore. You can also invoke the Alt + I keystroke, the keystroke for ignore. 10. Tab to Okay, press the spacebar, tab to Save Selected Scheme Button, press the spacebar, tab to okay, press the spacebar, now tab to okay 1 more time, press the spacebar, & you are done. Hope this helps. Take care. Mike ----- Original Message ----- From: rich To: [email protected] Sent: Friday, March 02, 2012 7:12 PM Subject: Re: [JAWS-Users] Microsoft word question. Thanks, but, when I checked, the "tab" was unchecked. Rich ----- Original Message ----- From: "Mike & Barbara" <[email protected]> To: <[email protected]> Sent: Friday, March 02, 2012 9:30 PM Subject: Re: [JAWS-Users] Microsoft word question. > Hi Rich, > > Here are 2 explanations on how to do this. > #1: > > 1. While in Word, press Insert / Jaws key + V, for quick settings. > 2. Arrow down a couple of times to the tree view > 3. Press the letterT, until you get to, Tab Measurement Indication, press > the spacebar to uncheck this box, & press enter to save the changes & > close. > > #2: > > 1. While in Word, press Insert / Jaws key + V, for quick settings. > 2. Type Tab, into the Search box, & wait for the list to populate. > 3. Arrow down to, Tab Measurement Indication, press the spacebar to > uncheck > this box, & press enter to save the changes & close. > > If someone has another way I would be interested in learning it as well. > Hope this helps. Take care. > Mike > > > ----- Original Message ----- > From: rich > To: [email protected] > Sent: Friday, March 02, 2012 3:13 PM > Subject: [JAWS-Users] Microsoft word question. > > > Hi all; > I have XP and13.0. > I just updated to 13.0 and when I am in Microsoft word, JAWS reads tabs, > for example, when I am at the top of the page, I hear 1 inch. > or, before a certain line I hear 1.5 inches. > I am not sure where to turn this off. > I can not get JAWS to announce the - symbol. > Precise directions are appreciated. > Oh, lately, I have sent messages to JAWS and they would not appear in my > in box. So please, could someone reply. > This would let me know if the message is going through. > Any suggestion on the "word" and, "sending" issue is much appreciated. > > Rich > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
