Hi Rich,
Below are steps on turning the Tab Control off through Speech & Sound
Schemes.
1. Press Insert / Jaws key + 6, on the number row above the main keyboare
or, press Insert / Jaws key + F2, to open the Jaws Manager, Press the
letter
S,
until you hear Jaws read Settings Center, & press enter.
2. Press control, shift, + D, for the Settings Center Default All
Applications.
3. Arrow down to, Speech & Sound Schemes, & press right arrow to open.
4. Arrow down to Modify Schemes, & press the spacebar, not enter.
Pressing
enter will take you out of the Settings Center.
5. Tab 2 times to, edit selected scheme button, & press the spacebar.
6. You will hear Modify Schemes... General page Scheme Description, press
shift + Tab 1 time, to be on theGenerl tab.
7. Right Arrow 1 time to the Control Type Tab.
8. Tab 1 time to, List View, Controls Behavior..., press the letter T, to
take you to Tab Control.
9. Tab 1 time to a group of radio buttons, arrow down to, ignore. You can
also invoke the Alt + I keystroke, the keystroke for ignore.
10. Tab to Okay, press the spacebar, tab to Save Selected Scheme Button,
press the spacebar, tab to okay, press the spacebar, now tab to okay 1
more
time,
press the spacebar, & you are done.
Hope this helps. Take care.
Mike
----- Original Message -----
From: rich
To: [email protected]
Sent: Friday, March 02, 2012 7:12 PM
Subject: Re: [JAWS-Users] Microsoft word question.
Thanks, but, when I checked, the "tab" was unchecked.
Rich
----- Original Message -----
From: "Mike & Barbara" <[email protected]>
To: <[email protected]>
Sent: Friday, March 02, 2012 9:30 PM
Subject: Re: [JAWS-Users] Microsoft word question.
> Hi Rich,
>
> Here are 2 explanations on how to do this.
> #1:
>
> 1. While in Word, press Insert / Jaws key + V, for quick settings.
> 2. Arrow down a couple of times to the tree view
> 3. Press the letterT, until you get to, Tab Measurement Indication,
press
> the spacebar to uncheck this box, & press enter to save the changes &
> close.
>
> #2:
>
> 1. While in Word, press Insert / Jaws key + V, for quick settings.
> 2. Type Tab, into the Search box, & wait for the list to populate.
> 3. Arrow down to, Tab Measurement Indication, press the spacebar to
> uncheck
> this box, & press enter to save the changes & close.
>
> If someone has another way I would be interested in learning it as
well.
> Hope this helps. Take care.
> Mike
>
>
> ----- Original Message -----
> From: rich
> To: [email protected]
> Sent: Friday, March 02, 2012 3:13 PM
> Subject: [JAWS-Users] Microsoft word question.
>
>
> Hi all;
> I have XP and13.0.
> I just updated to 13.0 and when I am in Microsoft word, JAWS reads
tabs,
> for example, when I am at the top of the page, I hear 1 inch.
> or, before a certain line I hear 1.5 inches.
> I am not sure where to turn this off.
> I can not get JAWS to announce the - symbol.
> Precise directions are appreciated.
> Oh, lately, I have sent messages to JAWS and they would not appear in
my
> in box. So please, could someone reply.
> This would let me know if the message is going through.
> Any suggestion on the "word" and, "sending" issue is much appreciated.
>
> Rich
> For answers to frequently asked questions about this list visit:
> http://www.jaws-users.com/help/
> For answers to frequently asked questions about this list visit:
> http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
