On Feb 9, 2008, at 9:44 PM, tyler_durden wrote: > > I just installed the debian package on my Kubuntu 7.10 box and was > pleased that everything ran very easily. I had to tweak the system > settings on my USB music library HDD to allow squeezecenter to access > it, but it was no big deal. > > I then checked my SB3 and found that it was recognized by > SqueezeCenter > (along with the SBR, thank you) and all seemed well. I started > scrolling through menus on the SB3 using the IR remote and got to > squeezenetwork beta. It then displayed a PIN number on the SB3 and I > was unable to get the SB3 to display anything else. I reset it and it > rebooted, reconnected to the network, and and then jumped immediately > back to the PIN number display. > > Thinking back, it is possible that there was some other text that I > wasn't seeing because I have the text size on the display set to > maximum. I finally tried logging into squeezenetwork beta web site > and > entered the PIN that was displayed on the SB3. The SB3 started > working > again. I also noticed that the SBR had apparently registered itself > on > the squeezenetwork beta site because it was already listed there. > > I think something needs to be done to allow a person to exit the pin > no. display on the SB3 without going to the web site and loggin in and > setting up the unit. A lot of people may get trapped by that one.
Yeah I have an open bug to make left on the PIN screen take you back to SC. Good point about large font mode, I'll see if I can make the text better in that case. _______________________________________________ jive mailing list [email protected] http://lists.slimdevices.com/cgi-bin/mailman/listinfo/jive
