Keyboard is the only thing with a problem so far, has to be something with it too.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Belle Sent: Sunday, September 19, 2010 7:34 AM To: JSonar -- JAWS Scripts for Sonar discussion list Subject: Re: [Jsonar] Getting rid of hum/hiss One reason, well, several reasons the 10 10 cost more, balanced i-o can make a huge difference when you have noise problems. Also having a nice break-out box with the separate power supply and converters removed from the card makes for cleaner, hotter signal with a higher snr. These cards are pricey compared to some newer models out there that have pres and such already, but for good clean reliable studio grade i-o, it's still a great option. Also, with pci card devices, or pci express, one still can get better latency than with usb or firewire. At 05:30 PM 9/18/2010, you wrote: >Having a huntch it is either being over amped because of the xlr ins or >the keyboard putting out some funky signal somewhere. Trying to >eliminate the problem is sort of hard when you have 0 1/4 inch ins on >the soundcard. Really couldn't see paying an extra $600 for 2 1/4 inch >ins on a doc. > >The cable is new and in good shape. Guess the best I can try is putting >RCA adaptors on the 2 1/4 inch mono ends and doing what DJX >recommended. > >-----Original Message----- >From: [email protected] [mailto:[email protected]] On >Behalf Of Chris Smart >Sent: Saturday, September 18, 2010 6:08 PM >To: JSonar -- JAWS Scripts for Sonar discussion list >Subject: Re: [Jsonar] Getting rid of hum/hiss > > >I would try getting the correct cables so you can eliminate the >adapters, just to rule out one variable. If you can get balanced >cables, that might get rid of the hum although it isn't a sure thing. > >If you have Sound Forge, one of the EQ plug-ins has a preset for >removing hum that uses four stacked notch filters. > >Do you have the Sonitus effects with your copy of Sonar? If so, use the >Sonitus EQ and set up narrow bands to cut at 60 HZ and multiples of 60, >120, 180, etc. I doubt you're just getting the fundamental at 60 HZ; >usually there are some harmonics in there as well. > >But, before filtering with software, which might negatively affect the >audio you do want to hear, try to figure out where the noise is coming >from and correct things there, with better cables etc. > >Chris > > >_______________________________________________ >Find JSonar and Sonar FAQs, articles, guides and downloads at >jsonar.org. > >Jsonar mailing list >[email protected] http://jsonar.org/mailman/listinfo/jsonar_jsonar.org > > >_______________________________________________ >Find JSonar and Sonar FAQs, articles, guides and downloads at >jsonar.org. > >Jsonar mailing list >[email protected] http://jsonar.org/mailman/listinfo/jsonar_jsonar.org WARNING!!! This email could contain innocent phrases which, if taken out of context, or read from an existing inclination to be hostile, or an overly politically correct world view could induce cursing, abusive language, or other indications of less than desirable behavior in a public venue. No ill will is intended. The sender takes no responsibility for mis-interpretation or otherwise extrapolated extended meaning, intent, or purposes implied or imagined from said phrases. The receiver of any such email containing such phrases is solely responsible for good interpretation and intelligent deployment of subsequent responses to the above communication. _______________________________________________ Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org. Jsonar mailing list [email protected] http://jsonar.org/mailman/listinfo/jsonar_jsonar.org _______________________________________________ Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org. Jsonar mailing list [email protected] http://jsonar.org/mailman/listinfo/jsonar_jsonar.org
