Try Junoscope, the Configuration Manager module is really good. Regards,
Matias Lambert *Osinet Telecomunicaciones* Lavalleja 637 - Capital Federal Argentina - C1414DTM http://www.osinet.com.ar <http://www.osinet.com.ar/> Eric Van Tol escribió: >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of >> Diogo Montagner >> Sent: Thursday, January 03, 2008 6:34 AM >> To: [email protected] >> Subject: [j-nsp] JUNOS Configuration backup >> >> Hi all, >> >> I'm looking for the best sollution for a JUNOS configuration >> backup methods. >> > > Two suggestions that we use: > > 1. RANCID (http://www.shrubbery.net/rancid) - Open source, works with > several types of routers/switches/MUXes/etc. Can be scheduled to run at > any time, stores configs, emails changes, and when used in conjunction > with CVSWeb, the configs can be seen and compared on a website. Been > using this for years and not once had a problem with it. The only > downside is that for gear that isn't in the currently "supported" list, > some coding has to be done to get it to work. > > 2. Cirrus Configuration Policy Manager (http://www.solarwinds.net) - > Closed source, very good at not only everything above (with the > exception of viewing the config comparisons online), but also for > forming configuration policies. You can create a policy template, run > it against all your routers/switches and ensure that they all match your > pre-defined security or administrative policies. Also works with *any* > device you can telnet/ssh to - not just certain types of > routers/switches. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
