Or you could use this http://www.juniper.net/techpubs/software/junos/junos85/swconfig85-system-basics/id-11180555.html
http://www.juniper.net/techpubs/software/junos/junos85/swconfig85-system-basics/id-10944516.html#id-10944516 ref: http://puck.nether.net/pipermail/juniper-nsp/2005-August/004837.html -Peder On Jan 3, 2008 3:38 PM, Shane Ronan <[EMAIL PROTECTED]> wrote: > Check out RANCID, it's an opensource config differ. > > http://www.shrubbery.net/rancid/ > > > On Jan 3, 2008, at 3:34 AM, Diogo Montagner wrote: > > > Hi all, > > > > I'm looking for the best sollution for a JUNOS configuration backup > > methods. > > > > The best solution for my case would be the "system archival" with a > > plus > > where I could specify the time for the upload of configuration to > > the FTP > > server (just like a cronjob). > > The system archival support only two methods of configuration: > > transfer-on-commit and transfer-on-interval. > > > > At this time, I'm using transfer-on-interval but this solution does > > not > > ensure that transfer to the FTP site will occur every day at the > > same time > > for a long period. > > > > Does anybody have any suggestion ? > > > > Best regards, > > > > -- > > ./diogo -montagner > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
