Yes. I was confused by the part of documentation saying "No configuration is required on an RPS if you: Plan to back up as many as six non-PoE switches". (page 72 - Using default RPS configuration"). So I said to myself: "I am ok if I don't have the ability to adjust the priorities or upgrade the firmware at this point. I just need the redundant power". Tried to make a shortcut. Wrong idea.
Nick On Thu, Jul 4, 2013 at 9:40 PM, Morgan McLean <[email protected]> wrote: > This is true, because I run 3300's and ran into this very problem. > > Morgan > > > On Thu, Jul 4, 2013 at 10:36 AM, Nick Kritsky <[email protected]>wrote: > >> Thanks for all who replied on- and off-list. >> Looks like the obvious step I was missing is - "EX3300 switches have to >> run >> 12.1 or above to work with EX-RPS". I will try to confirm this tomorrow. >> >> nick >> >> >> On Thu, Jul 4, 2013 at 6:04 PM, Nick Kritsky <[email protected]> >> wrote: >> >> > Hello all, >> > >> > Is anyone here who has experience with EX-RPS - redundant power supply >> for >> > EX switches? >> > I'd like to ask some questions/directions . >> > >> > From what I see - basically they are just DC converters with some >> minimal >> > set of knobs. >> > Documentation is virtually non-existent. Main idea I got from the site - >> > it should just work when you plug it in. But guess what - it doesn't. >> It >> > looks like I have missed some very simple step. The one that was >> considered >> > obvious to the guy who was creating the manual :) >> > >> > thanks >> > nick >> > >> > >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > > > -- > Thanks, > Morgan > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
