I am also interested in experiences with the EX4300s in the same kind of setup.
Thanks. On Sat, Aug 2, 2014 at 6:13 AM, Paul S. <[email protected]> wrote: > Hi folks, > > We're considering the EX4300 to run routing (l3) for a few hypervisors of > ours that are connected via l2. > > Primarily interested due to the rather massive arp limit (64, 000) on the > switch, but we've been told (and searched for ourselves to find out) that > the 4300 platform has been plagued by random issues since launch. > > Has this improved, and is anyone using the 4300 on a primarily L3 > environment who could possibly chime in? > > It seems to be the most cost effective way to get arp entries on a Juniper > platform (Other than upgrading to the full stacks like 8200/9200). > > Off-list replies are welcome, and thanks to everyone reading this > beforehand. > > -- Paul > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
