+1 on the 4200. Had very good luck with the 4200 series. Also had good luck with the 4300 but there were some bugs. In a basic operation mode though they are quite stable. That being said I was really pleased with the 4200 and you might want to check them out assuming the lower arp limit isn’t an issue.
On Aug 6, 2014, at 7:30 AM, Yucong Sun <[email protected]> wrote: > I used ex4200 to do exactly what you did before. ex4200 releases is pretty > rock solid, feature extensive, although with lower arp entry limits. > > Given the price difference maybe you can connect each l2 domain to its own > ex4200 and have them do ospf routing among selves, which maybe give you > better failure tolerances compare to a single core. > > > On Wed, Aug 6, 2014 at 6:35 PM, Giuliano Cardozo Medalha < > [email protected]> wrote: > >> we are using ex4300 with the last release available >> >> the setup is pretty simple using virtual chassis, lag, L3 and poe >> >> it works pretty fine and we do not have any serious problems >> >> sometimes the poe controller goes down but we have a case oppened in jtac >> to try solve it >> >> Sent from my iPhone >> >>> On 06/08/2014, at 07:15, Sebastian Wiesinger <[email protected]> >> wrote: >>> >>> * Paul S. <[email protected]> [2014-08-02 05:18]: >>>> Hi folks, >>>> >>>> We're considering the EX4300 to run routing (l3) for a few >>>> hypervisors of ours that are connected via l2. >>>> >>>> Primarily interested due to the rather massive arp limit (64, 000) >>>> on the switch, but we've been told (and searched for ourselves to >>>> find out) that the 4300 platform has been plagued by random issues >>>> since launch. >>> >>> I don't have hands-on experience but I looked at the EX4300 platform >>> for a new deployment. If you look at the current release notes: >>> >>> >> http://www.juniper.net/techpubs/en_US/junos13.2/information-products/topic-collections/ex-qfx-series/release-notes/ex-qfx-series-junos-release-notes-13.2X51-D25.pdf >>> >>> There are a lot of (serious) bugs still getting fixed so I'm not sure >>> how mature this platform is. One big reason for that is probably >>> because EX4300 uses other chips than the rest of the 4xxx series >>> (Broadcom). >>> >>> Regards >>> >>> Sebastian >>> >>> -- >>> GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) >>> 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE >> SCYTHE. >>> -- Terry Pratchett, The Fifth Elephant >>> _______________________________________________ >>> juniper-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
