we are using ex4300 with the last release available the setup is pretty simple using virtual chassis, lag, L3 and poe
it works pretty fine and we do not have any serious problems sometimes the poe controller goes down but we have a case oppened in jtac to try solve it Sent from my iPhone > On 06/08/2014, at 07:15, Sebastian Wiesinger <[email protected]> > wrote: > > * Paul S. <[email protected]> [2014-08-02 05:18]: >> Hi folks, >> >> We're considering the EX4300 to run routing (l3) for a few >> hypervisors of ours that are connected via l2. >> >> Primarily interested due to the rather massive arp limit (64, 000) >> on the switch, but we've been told (and searched for ourselves to >> find out) that the 4300 platform has been plagued by random issues >> since launch. > > I don't have hands-on experience but I looked at the EX4300 platform > for a new deployment. If you look at the current release notes: > > http://www.juniper.net/techpubs/en_US/junos13.2/information-products/topic-collections/ex-qfx-series/release-notes/ex-qfx-series-junos-release-notes-13.2X51-D25.pdf > > There are a lot of (serious) bugs still getting fixed so I'm not sure > how mature this platform is. One big reason for that is probably > because EX4300 uses other chips than the rest of the 4xxx series > (Broadcom). > > Regards > > Sebastian > > -- > GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) > 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE > SCYTHE. > -- Terry Pratchett, The Fifth Elephant > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
