* Paul S. <[email protected]> [2014-08-02 05:18]: > Hi folks, > > We're considering the EX4300 to run routing (l3) for a few > hypervisors of ours that are connected via l2. > > Primarily interested due to the rather massive arp limit (64, 000) > on the switch, but we've been told (and searched for ourselves to > find out) that the 4300 platform has been plagued by random issues > since launch.
I don't have hands-on experience but I looked at the EX4300 platform for a new deployment. If you look at the current release notes: http://www.juniper.net/techpubs/en_US/junos13.2/information-products/topic-collections/ex-qfx-series/release-notes/ex-qfx-series-junos-release-notes-13.2X51-D25.pdf There are a lot of (serious) bugs still getting fixed so I'm not sure how mature this platform is. One big reason for that is probably because EX4300 uses other chips than the rest of the 4xxx series (Broadcom). Regards Sebastian -- GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE. -- Terry Pratchett, The Fifth Elephant _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
