Well,
We had a few issues with FS.com devices in our QFX's.
We're still looking if its the platform or FS.com.
Although we replaced them with Juniper certified devices from
optic.ca and its going better for the past 3 weeks.
-----
Alain Hebert [email protected]
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443
On 10/13/17 00:59, Gustavo Santos wrote:
Because of the possibility of out of order packet issues "on per packet"
load balance and a with flow based load balance, a 10Gbps limit per flow.
2017-10-11 22:57 GMT-03:00 Colton Conor <[email protected]>:
So why go with this then? You could litterally do a passive mux and 4 10G
colored optics for much much less than that. Check out FS.com
On Tue, Oct 10, 2017 at 4:41 PM, Gustavo Santos <[email protected]>
wrote:
Here in Brazil where everything costs a lot more than US because of
taxes, about U$2485 per module.
2017-10-09 23:53 GMT-03:00 Colton Conor <[email protected]>:
How much do those cost? We have used many of the 10KM optics in out
ACX5048, but never the 40KM due to cost. It seems much cheaper to use 4
colored SFP+'s?
On Mon, Oct 9, 2017 at 8:16 AM, Gustavo Santos <[email protected]>
wrote:
Hi,
It's an ER4 , LR4 is just the label precision coded for compatibility.
The module part name is PRE-QSFP-ER4
2017-10-04 19:57 GMT-03:00 Aaron Gould <[email protected]>:
Hey that’s good to know Gustavo… but LR4 , is that shorter than 40 km
?
-Aaron
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
