Dear All, I am trying to use kgdb for my arm board (at91rm9200) based. I am getting the following error:
Remote debugging using udp:192.168.0.201:6443 Remote communication error: Connection refused. It looks like the error discusses in this thread. http://www.mail-archive.com/[email protected]/msg01255.html The problem is that my local port seems to be 32951 (which happens to change on each connection trial). My tcpdump shows the following: 16:51:02.552713 IP 192.168.0.169.32951 > 192.168.0.201.6443: UDP, length 5 16:51:02.552871 IP 192.168.0.169.32953 > 192.168.0.201.6443: UDP, length 14 16:51:02.553130 IP 192.168.0.201 > 192.168.0.169: ICMP 192.168.0.201 udp port 6443 unreachable, length 41 16:51:02.553349 IP 192.168.0.201 > 192.168.0.169: ICMP 192.168.0.201 udp port 6443 unreachable, length 50 How do I configure gdb to use 6442 rather than 32951. Or is it a configuration required on the target board? Thanks Regards --Himanshu ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Kgdb-bugreport mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
