Himanshu, I will need your "demsg' log too. Try giving hard coded port numbers in command line instead of using defaults like kgdboe= [EMAIL PROTECTED]/,[EMAIL PROTECTED]:6442/
Please check out the port syntax though. -Miline On 3/17/08, Himanshu Chauhan <[EMAIL PROTECTED]> wrote: > > Milind Dumbare wrote: > > Hi Himanshu, > > Could you please post your grub entry and .config file > > -Miline > > > > On 3/17/08, *Himanshu Chauhan* <[EMAIL PROTECTED] > > > <mailto:[EMAIL PROTECTED]>> wrote: > > > > Dear All, > > > > I am trying to use kgdb for my arm board (at91rm9200) based. I am > > getting the following error: > > > > Remote debugging using udp:192.168.0.201:6443 > > > <http://192.168.0.201:6443> > > > Remote communication error: Connection refused. > > > > It looks like the error discusses in this thread. > > > > > http://www.mail-archive.com/[email protected]/msg01255.html > > > > The problem is that my local port seems to be 32951 (which happens > to > > change on each connection trial). My tcpdump shows the following: > > > > 16:51:02.552713 IP 192.168.0.169.32951 > 192.168.0.201.6443: UDP, > > length 5 > > 16:51:02.552871 IP 192.168.0.169.32953 > 192.168.0.201.6443: UDP, > > length 14 > > > 16:51:02.553130 IP 192.168.0.201 <http://192.168.0.201> > > > 192.168.0.169 <http://192.168.0.169>: ICMP 192.168.0.201 > > <http://192.168.0.201> udp > > > port 6443 unreachable, length 41 > > > 16:51:02.553349 IP 192.168.0.201 <http://192.168.0.201> > > > 192.168.0.169 <http://192.168.0.169>: ICMP 192.168.0.201 > > <http://192.168.0.201> udp > > > port 6443 unreachable, length 50 > > > > > > How do I configure gdb to use 6442 rather than 32951. Or is it a > > configuration required on the target board? > > > > Hi Milind, > > I am using kgdb on an ARM platform, so I boot using uboot. You might be > interested in the kernel parameters I pass to kernel. Its like this. > > root=/dev/mmcblk0p1 rootdelay=3 mem=32M console=/dev/ttyS0,115200 > [EMAIL PROTECTED]/,@192.168.0.169/ > > My kernel config is like this: > > Thanks for your prompt reply. Need help here :) > > Regards > --Himanshu > > P.S.: I wanted to use the DTE port on board but I had no idea as to now > kgdb expects on a "kgdb-specific" serial driver. > > ---- CONFIG ---- > > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.20 > # Mon Mar 17 16:34:53 2008 > # > CONFIG_ARM=y > # CONFIG_GENERIC_TIME is not set > CONFIG_MMU=y > CONFIG_GENERIC_HARDIRQS=y > CONFIG_TRACE_IRQFLAGS_SUPPORT=y > CONFIG_HARDIRQS_SW_RESEND=y > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_RWSEM_GENERIC_SPINLOCK=y > # CONFIG_ARCH_HAS_ILOG2_U32 is not set > # CONFIG_ARCH_HAS_ILOG2_U64 is not set > CONFIG_GENERIC_HWEIGHT=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_VECTORS_BASE=0xffff0000 > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_BROKEN_ON_SMP=y > CONFIG_LOCK_KERNEL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > # CONFIG_LOCALVERSION_AUTO is not set > # CONFIG_SWAP is not set > CONFIG_SYSVIPC=y > # CONFIG_IPC_NS is not set > # CONFIG_POSIX_MQUEUE is not set > # CONFIG_BSD_PROCESS_ACCT is not set > # CONFIG_TASKSTATS is not set > # CONFIG_UTS_NS is not set > # CONFIG_AUDIT is not set > # CONFIG_IKCONFIG is not set > CONFIG_SYSFS_DEPRECATED=y > # CONFIG_RELAY is not set > CONFIG_INITRAMFS_SOURCE="" > CONFIG_CC_OPTIMIZE_FOR_SIZE=y > CONFIG_SYSCTL=y > # CONFIG_EMBEDDED is not set > CONFIG_UID16=y > CONFIG_SYSCTL_SYSCALL=y > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_ALL is not set > # CONFIG_KALLSYMS_EXTRA_PASS is not set > CONFIG_HOTPLUG=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_SLAB=y > CONFIG_VM_EVENT_COUNTERS=y > CONFIG_RT_MUTEXES=y > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > # CONFIG_SLOB is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_KMOD=y > > # > # Block layer > # > CONFIG_BLOCK=y > # CONFIG_LBD is not set > # CONFIG_BLK_DEV_IO_TRACE is not set > # CONFIG_LSF is not set > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > # CONFIG_IOSCHED_DEADLINE is not set > # CONFIG_IOSCHED_CFQ is not set > CONFIG_DEFAULT_AS=y > # CONFIG_DEFAULT_DEADLINE is not set > # CONFIG_DEFAULT_CFQ is not set > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="anticipatory" > > # > # System Type > # > # CONFIG_ARCH_AAEC2000 is not set > # CONFIG_ARCH_INTEGRATOR is not set > # CONFIG_ARCH_REALVIEW is not set > # CONFIG_ARCH_VERSATILE is not set > CONFIG_ARCH_AT91=y > # CONFIG_ARCH_CLPS7500 is not set > # CONFIG_ARCH_CLPS711X is not set > # CONFIG_ARCH_CO285 is not set > # CONFIG_ARCH_EBSA110 is not set > # CONFIG_ARCH_EP93XX is not set > # CONFIG_ARCH_FOOTBRIDGE is not set > # CONFIG_ARCH_NETX is not set > # CONFIG_ARCH_H720X is not set > # CONFIG_ARCH_IMX is not set > # CONFIG_ARCH_IOP32X is not set > # CONFIG_ARCH_IOP33X is not set > # CONFIG_ARCH_IOP13XX is not set > # CONFIG_ARCH_IXP4XX is not set > # CONFIG_ARCH_IXP2000 is not set > # CONFIG_ARCH_IXP23XX is not set > # CONFIG_ARCH_L7200 is not set > # CONFIG_ARCH_PNX4008 is not set > # CONFIG_ARCH_PXA is not set > # CONFIG_ARCH_RPC is not set > # CONFIG_ARCH_SA1100 is not set > # CONFIG_ARCH_S3C2410 is not set > # CONFIG_ARCH_SHARK is not set > # CONFIG_ARCH_LH7A40X is not set > # CONFIG_ARCH_OMAP is not set > > # > # Atmel AT91 System-on-Chip > # > CONFIG_ARCH_AT91RM9200=y > # CONFIG_ARCH_AT91SAM9260 is not set > # CONFIG_ARCH_AT91SAM9261 is not set > # CONFIG_ARCH_AT91SAM9263 is not set > > # > # AT91RM9200 Board Type > # > # CONFIG_MACH_ONEARM is not set > # CONFIG_ARCH_AT91RM9200DK is not set > CONFIG_MACH_AT91RM9200EK=y > # CONFIG_MACH_CSB337 is not set > # CONFIG_MACH_CSB637 is not set > # CONFIG_MACH_CARMEVA is not set > # CONFIG_MACH_ATEB9200 is not set > # CONFIG_MACH_KB9200 is not set > # CONFIG_MACH_KAFA is not set > > # > # AT91 Board Options > # > # CONFIG_MTD_AT91_DATAFLASH_CARD is not set > > # > # AT91 Feature Selections > # > CONFIG_AT91_PROGRAMMABLE_CLOCKS=y > > # > # Processor Type > # > CONFIG_CPU_32=y > CONFIG_CPU_ARM920T=y > CONFIG_CPU_32v4T=y > CONFIG_CPU_ABRT_EV4T=y > CONFIG_CPU_CACHE_V4WT=y > CONFIG_CPU_CACHE_VIVT=y > CONFIG_CPU_COPY_V4WB=y > CONFIG_CPU_TLB_V4WBI=y > CONFIG_CPU_CP15=y > CONFIG_CPU_CP15_MMU=y > > # > # Processor Features > # > # CONFIG_ARM_THUMB is not set > # CONFIG_CPU_ICACHE_DISABLE is not set > # CONFIG_CPU_DCACHE_DISABLE is not set > # CONFIG_CPU_DCACHE_WRITETHROUGH is not set > > # > # Bus support > # > > # > # PCCARD (PCMCIA/CardBus) support > # > # CONFIG_PCCARD is not set > > # > # Kernel Features > # > CONFIG_PREEMPT=y > # CONFIG_NO_IDLE_HZ is not set > CONFIG_HZ=100 > # CONFIG_AEABI is not set > # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_FLATMEM_MANUAL=y > # CONFIG_DISCONTIGMEM_MANUAL is not set > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_FLATMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > # CONFIG_SPARSEMEM_STATIC is not set > CONFIG_SPLIT_PTLOCK_CPUS=4096 > # CONFIG_RESOURCES_64BIT is not set > # CONFIG_LEDS is not set > CONFIG_ALIGNMENT_TRAP=y > > # > # Boot options > # > CONFIG_ZBOOT_ROM_TEXT=0x0 > CONFIG_ZBOOT_ROM_BSS=0x0 > CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 > root=/dev/ram0 rw" > # CONFIG_XIP_KERNEL is not set > > # > # Floating point emulation > # > > # > # At least one emulation must be selected > # > CONFIG_FPE_NWFPE=y > # CONFIG_FPE_NWFPE_XP is not set > # CONFIG_FPE_FASTFPE is not set > > # > # Userspace binary formats > # > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_AOUT is not set > # CONFIG_BINFMT_MISC is not set > # CONFIG_ARTHUR is not set > > # > # Power management options > # > # CONFIG_PM is not set > # CONFIG_APM is not set > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > # CONFIG_NETDEBUG is not set > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > CONFIG_XFRM=y > # CONFIG_XFRM_USER is not set > # CONFIG_XFRM_SUB_POLICY is not set > # CONFIG_NET_KEY is not set > CONFIG_INET=y > # CONFIG_IP_MULTICAST is not set > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_FIB_HASH=y > CONFIG_IP_PNP=y > # CONFIG_IP_PNP_DHCP is not set > CONFIG_IP_PNP_BOOTP=y > # CONFIG_IP_PNP_RARP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_ARPD is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > # CONFIG_INET_XFRM_TUNNEL is not set > # CONFIG_INET_TUNNEL is not set > CONFIG_INET_XFRM_MODE_TRANSPORT=y > CONFIG_INET_XFRM_MODE_TUNNEL=y > CONFIG_INET_XFRM_MODE_BEET=y > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_CUBIC=y > CONFIG_DEFAULT_TCP_CONG="cubic" > # CONFIG_TCP_MD5SIG is not set > # CONFIG_IPV6 is not set > # CONFIG_INET6_XFRM_TUNNEL is not set > # CONFIG_INET6_TUNNEL is not set > # CONFIG_NETWORK_SECMARK is not set > # CONFIG_NETFILTER is not set > > # > # DCCP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_DCCP is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_SCTP is not set > > # > # TIPC Configuration (EXPERIMENTAL) > # > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > # CONFIG_IEEE80211 is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > # CONFIG_FW_LOADER is not set > # CONFIG_DEBUG_DRIVER is not set > # CONFIG_SYS_HYPERVISOR is not set > > # > # Connector - unified userspace <-> kernelspace linker > # > # CONFIG_CONNECTOR is not set > > # > # Memory Technology Devices (MTD) > # > CONFIG_MTD=y > # CONFIG_MTD_DEBUG is not set > # CONFIG_MTD_CONCAT is not set > CONFIG_MTD_PARTITIONS=y > # CONFIG_MTD_REDBOOT_PARTS is not set > CONFIG_MTD_CMDLINE_PARTS=y > # CONFIG_MTD_AFS_PARTS is not set > > # > # User Modules And Translation Layers > # > CONFIG_MTD_CHAR=y > CONFIG_MTD_BLKDEVS=y > CONFIG_MTD_BLOCK=y > # CONFIG_FTL is not set > # CONFIG_NFTL is not set > # CONFIG_INFTL is not set > # CONFIG_RFD_FTL is not set > # CONFIG_SSFDC is not set > > # > # RAM/ROM/Flash chip drivers > # > CONFIG_MTD_CFI=y > CONFIG_MTD_JEDECPROBE=y > CONFIG_MTD_GEN_PROBE=y > # CONFIG_MTD_CFI_ADV_OPTIONS is not set > CONFIG_MTD_MAP_BANK_WIDTH_1=y > CONFIG_MTD_MAP_BANK_WIDTH_2=y > CONFIG_MTD_MAP_BANK_WIDTH_4=y > # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set > # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set > # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set > CONFIG_MTD_CFI_I1=y > CONFIG_MTD_CFI_I2=y > # CONFIG_MTD_CFI_I4 is not set > # CONFIG_MTD_CFI_I8 is not set > # CONFIG_MTD_CFI_INTELEXT is not set > CONFIG_MTD_CFI_AMDSTD=y > # CONFIG_MTD_CFI_STAA is not set > CONFIG_MTD_CFI_UTIL=y > # CONFIG_MTD_RAM is not set > # CONFIG_MTD_ROM is not set > # CONFIG_MTD_ABSENT is not set > # CONFIG_MTD_OBSOLETE_CHIPS is not set > > # > # Mapping drivers for chip access > # > # CONFIG_MTD_COMPLEX_MAPPINGS is not set > CONFIG_MTD_PHYSMAP=y > CONFIG_MTD_PHYSMAP_START=0x0 > CONFIG_MTD_PHYSMAP_LEN=0x0 > CONFIG_MTD_PHYSMAP_BANKWIDTH=0 > # CONFIG_MTD_ARM_INTEGRATOR is not set > # CONFIG_MTD_IMPA7 is not set > # CONFIG_MTD_PLATRAM is not set > > # > # Self-contained MTD device drivers > # > # CONFIG_MTD_DATAFLASH is not set > # CONFIG_MTD_M25P80 is not set > # CONFIG_MTD_SLRAM is not set > # CONFIG_MTD_PHRAM is not set > # CONFIG_MTD_MTDRAM is not set > # CONFIG_MTD_BLOCK2MTD is not set > > # > # Disk-On-Chip Device Drivers > # > # CONFIG_MTD_DOC2000 is not set > # CONFIG_MTD_DOC2001 is not set > # CONFIG_MTD_DOC2001PLUS is not set > CONFIG_MTD_AT91_DATAFLASH=m > > # > # NAND Flash Device Drivers > # > # CONFIG_MTD_NAND is not set > > # > # OneNAND Flash Device Drivers > # > # CONFIG_MTD_ONENAND is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play support > # > > # > # Block devices > # > # CONFIG_BLK_DEV_COW_COMMON is not set > # CONFIG_BLK_DEV_LOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_UB is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=8192 > CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 > CONFIG_BLK_DEV_INITRD=y > # CONFIG_CDROM_PKTCDVD is not set > # CONFIG_ATA_OVER_ETH is not set > > # > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > # CONFIG_SCSI is not set > # CONFIG_SCSI_NETLINK is not set > > # > # Serial ATA (prod) and Parallel ATA (experimental) drivers > # > # CONFIG_ATA is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > > # > # IEEE 1394 (FireWire) support > # > > # > # I2O device support > # > > # > # Network device support > # > CONFIG_NETDEVICES=y > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > > # > # PHY device support > # > # CONFIG_PHYLIB is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > CONFIG_MII=y > CONFIG_ARM_AT91_ETHER=y > # CONFIG_SMC91X is not set > # CONFIG_DM9000 is not set > > # > # Ethernet (1000 Mbit) > # > > # > # Ethernet (10000 Mbit) > # > > # > # Token Ring devices > # > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_SHAPER is not set > # CONFIG_NETCONSOLE is not set > CONFIG_NETPOLL=y > CONFIG_NETPOLL_RX=y > CONFIG_NETPOLL_TRAP=y > CONFIG_NET_POLL_CONTROLLER=y > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Input device support > # > CONFIG_INPUT=y > # CONFIG_INPUT_FF_MEMLESS is not set > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > # CONFIG_INPUT_MOUSEDEV_PSAUX is not set > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > # CONFIG_INPUT_EVDEV is not set > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > # CONFIG_INPUT_KEYBOARD is not set > # CONFIG_INPUT_MOUSE is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > # > # Hardware I/O ports > # > # CONFIG_SERIO is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_VT_HW_CONSOLE_BINDING is not set > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > # CONFIG_SERIAL_8250 is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_ATMEL=y > CONFIG_SERIAL_ATMEL_CONSOLE=y > # CONFIG_SERIAL_ATMEL_TTYAT is not set > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > CONFIG_UNIX98_PTYS=y > CONFIG_LEGACY_PTYS=y > CONFIG_LEGACY_PTY_COUNT=256 > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > CONFIG_WATCHDOG=y > CONFIG_WATCHDOG_NOWAYOUT=y > > # > # Watchdog Device Drivers > # > # CONFIG_SOFT_WATCHDOG is not set > CONFIG_AT91RM9200_WATCHDOG=y > > # > # USB-based Watchdog Cards > # > # CONFIG_USBPCWATCHDOG is not set > CONFIG_HW_RANDOM=m > # CONFIG_NVRAM is not set > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_RAW_DRIVER is not set > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > CONFIG_AT91_SPI=m > CONFIG_AT91_SPIDEV=m > # CONFIG_AT91_CS_DECODE is not set > CONFIG_ICT_GPIODEV=m > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # SPI support > # > CONFIG_SPI=y > # CONFIG_SPI_DEBUG is not set > CONFIG_SPI_MASTER=y > > # > # SPI Master Controller Drivers > # > CONFIG_SPI_ATMEL=y > # CONFIG_SPI_BITBANG is not set > CONFIG_SPI_AT91_MANUAL_CS=y > > # > # SPI Protocol Masters > # > > # > # Dallas's 1-wire bus > # > # CONFIG_W1 is not set > > # > # Hardware Monitoring support > # > CONFIG_HWMON=y > # CONFIG_HWMON_VID is not set > # CONFIG_SENSORS_ABITUGURU is not set > # CONFIG_SENSORS_F71805F is not set > # CONFIG_SENSORS_LM70 is not set > # CONFIG_SENSORS_PC87427 is not set > # CONFIG_SENSORS_VT1211 is not set > # CONFIG_HWMON_DEBUG_CHIP is not set > > # > # Misc devices > # > # CONFIG_TIFM_CORE is not set > > # > # LED devices > # > # CONFIG_NEW_LEDS is not set > > # > # LED drivers > # > > # > # LED Triggers > # > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > # CONFIG_USB_DABUSB is not set > > # > # Graphics support > # > CONFIG_FIRMWARE_EDID=y > CONFIG_FB=y > CONFIG_FB_CFB_FILLRECT=y > CONFIG_FB_CFB_COPYAREA=y > CONFIG_FB_CFB_IMAGEBLIT=y > # CONFIG_FB_MACMODES is not set > # CONFIG_FB_BACKLIGHT is not set > # CONFIG_FB_MODE_HELPERS is not set > # CONFIG_FB_TILEBLITTING is not set > CONFIG_FB_S1D13XXX=y > # CONFIG_FB_VIRTUAL is not set > > # > # Console display driver support > # > # CONFIG_VGA_CONSOLE is not set > CONFIG_DUMMY_CONSOLE=y > # CONFIG_FRAMEBUFFER_CONSOLE is not set > > # > # Logo configuration > # > # CONFIG_LOGO is not set > # CONFIG_BACKLIGHT_LCD_SUPPORT is not set > > # > # Sound > # > # CONFIG_SOUND is not set > > # > # HID Devices > # > CONFIG_HID=y > > # > # USB support > # > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > # CONFIG_USB_ARCH_HAS_EHCI is not set > CONFIG_USB=y > CONFIG_USB_DEBUG=y > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > # CONFIG_USB_OTG is not set > > # > # USB Host Controller Drivers > # > # CONFIG_USB_ISP116X_HCD is not set > CONFIG_USB_OHCI_HCD=y > # CONFIG_USB_OHCI_BIG_ENDIAN is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > # CONFIG_USB_SL811_HCD is not set > > # > # USB Device Class drivers > # > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > # > > # > # may also be needed; see USB_STORAGE Help for more information > # > # CONFIG_USB_LIBUSUAL is not set > > # > # USB Input Devices > # > # CONFIG_USB_HID is not set > > # > # USB HID Boot Protocol drivers > # > # CONFIG_USB_KBD is not set > # CONFIG_USB_MOUSE is not set > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_ACECAD is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_TOUCHSCREEN is not set > # CONFIG_USB_YEALINK is not set > # CONFIG_USB_XPAD is not set > # CONFIG_USB_ATI_REMOTE is not set > # CONFIG_USB_ATI_REMOTE2 is not set > # CONFIG_USB_KEYSPAN_REMOTE is not set > # CONFIG_USB_APPLETOUCH is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > > # > # USB Network Adapters > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET_MII is not set > # CONFIG_USB_USBNET is not set > # CONFIG_USB_MON is not set > > # > # USB port drivers > # > > # > # USB Serial Converter support > # > # CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_ADUTUX is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_CYPRESS_CY7C63 is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_PHIDGET is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_FTDI_ELAN is not set > # CONFIG_USB_APPLEDISPLAY is not set > # CONFIG_USB_LD is not set > # CONFIG_USB_TRANCEVIBRATOR is not set > # CONFIG_USB_TEST is not set > > # > # USB DSL modem support > # > > # > # USB Gadget Support > # > CONFIG_USB_GADGET=y > # CONFIG_USB_GADGET_DEBUG_FILES is not set > CONFIG_USB_GADGET_SELECTED=y > # CONFIG_USB_GADGET_NET2280 is not set > # CONFIG_USB_GADGET_PXA2XX is not set > # CONFIG_USB_GADGET_GOKU is not set > # CONFIG_USB_GADGET_LH7A40X is not set > # CONFIG_USB_GADGET_OMAP is not set > CONFIG_USB_GADGET_AT91=y > CONFIG_USB_AT91=y > # CONFIG_USB_GADGET_DUMMY_HCD is not set > # CONFIG_USB_GADGET_DUALSPEED is not set > # CONFIG_USB_ZERO is not set > # CONFIG_USB_ETH is not set > # CONFIG_USB_GADGETFS is not set > # CONFIG_USB_FILE_STORAGE is not set > # CONFIG_USB_G_SERIAL is not set > # CONFIG_USB_MIDI_GADGET is not set > > # > # MMC/SD Card support > # > CONFIG_MMC=y > # CONFIG_MMC_DEBUG is not set > CONFIG_MMC_BLOCK=y > CONFIG_MMC_AT91=y > # CONFIG_MMC_TIFM_SD is not set > > # > # Real Time Clock > # > CONFIG_RTC_LIB=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_HCTOSYS=y > CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > # CONFIG_RTC_DEBUG is not set > > # > # RTC interfaces > # > CONFIG_RTC_INTF_SYSFS=y > CONFIG_RTC_INTF_PROC=y > CONFIG_RTC_INTF_DEV=y > # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set > > # > # RTC drivers > # > # CONFIG_RTC_DRV_DS1553 is not set > # CONFIG_RTC_DRV_DS1742 is not set > # CONFIG_RTC_DRV_RS5C348 is not set > # CONFIG_RTC_DRV_M48T86 is not set > CONFIG_RTC_DRV_AT91RM9200=y > # CONFIG_RTC_DRV_TEST is not set > # CONFIG_RTC_DRV_MAX6902 is not set > # CONFIG_RTC_DRV_V3020 is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > CONFIG_EXT2_FS_XATTR=y > CONFIG_EXT2_FS_POSIX_ACL=y > CONFIG_EXT2_FS_SECURITY=y > CONFIG_EXT2_FS_XIP=y > CONFIG_FS_XIP=y > CONFIG_EXT3_FS=y > CONFIG_EXT3_FS_XATTR=y > CONFIG_EXT3_FS_POSIX_ACL=y > CONFIG_EXT3_FS_SECURITY=y > # CONFIG_EXT4DEV_FS is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_FS_MBCACHE=y > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > CONFIG_FS_POSIX_ACL=y > # CONFIG_XFS_FS is not set > # CONFIG_GFS2_FS is not set > # CONFIG_OCFS2_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_INOTIFY=y > CONFIG_INOTIFY_USER=y > # CONFIG_QUOTA is not set > CONFIG_DNOTIFY=y > # CONFIG_AUTOFS_FS is not set > # CONFIG_AUTOFS4_FS is not set > # CONFIG_FUSE_FS is not set > > # > # CD-ROM/DVD Filesystems > # > # CONFIG_ISO9660_FS is not set > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=m > CONFIG_MSDOS_FS=m > CONFIG_VFAT_FS=m > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > CONFIG_NTFS_FS=m > # CONFIG_NTFS_DEBUG is not set > CONFIG_NTFS_RW=y > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_SYSCTL=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > # CONFIG_TMPFS_POSIX_ACL is not set > # CONFIG_HUGETLB_PAGE is not set > CONFIG_RAMFS=y > # CONFIG_CONFIGFS_FS is not set > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > CONFIG_JFFS2_FS=y > CONFIG_JFFS2_FS_DEBUG=0 > CONFIG_JFFS2_FS_WRITEBUFFER=y > # CONFIG_JFFS2_SUMMARY is not set > # CONFIG_JFFS2_FS_XATTR is not set > CONFIG_JFFS2_COMPRESSION_OPTIONS=y > CONFIG_JFFS2_ZLIB=y > CONFIG_JFFS2_RTIME=y > # CONFIG_JFFS2_RUBIN is not set > # CONFIG_JFFS2_CMODE_NONE is not set > CONFIG_JFFS2_CMODE_PRIORITY=y > # CONFIG_JFFS2_CMODE_SIZE is not set > CONFIG_CRAMFS=y > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=m > # CONFIG_NFS_V3 is not set > # CONFIG_NFS_V4 is not set > # CONFIG_NFS_DIRECTIO is not set > CONFIG_NFSD=m > # CONFIG_NFSD_V3 is not set > CONFIG_NFSD_TCP=y > CONFIG_LOCKD=m > CONFIG_EXPORTFS=m > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=m > CONFIG_SUNRPC_GSS=m > CONFIG_RPCSEC_GSS_KRB5=m > CONFIG_RPCSEC_GSS_SPKM3=m > CONFIG_SMB_FS=m > # CONFIG_SMB_NLS_DEFAULT is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > # CONFIG_9P_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=m > CONFIG_NLS_DEFAULT="iso8859-1" > # CONFIG_NLS_CODEPAGE_437 is not set > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ASCII is not set > # CONFIG_NLS_ISO8859_1 is not set > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > > # > # Distributed Lock Manager > # > # CONFIG_DLM is not set > > # > # Profiling support > # > # CONFIG_PROFILING is not set > > # > # Kernel hacking > # > # CONFIG_PRINTK_TIME is not set > CONFIG_ENABLE_MUST_CHECK=y > # CONFIG_MAGIC_SYSRQ is not set > # CONFIG_UNUSED_SYMBOLS is not set > # CONFIG_DEBUG_FS is not set > # CONFIG_HEADERS_CHECK is not set > CONFIG_DEBUG_KERNEL=y > CONFIG_LOG_BUF_SHIFT=14 > CONFIG_DETECT_SOFTLOCKUP=y > # CONFIG_SCHEDSTATS is not set > CONFIG_DEBUG_SLAB=y > CONFIG_DEBUG_SLAB_LEAK=y > CONFIG_DEBUG_PREEMPT=y > # CONFIG_DEBUG_RT_MUTEXES is not set > # CONFIG_RT_MUTEX_TESTER is not set > CONFIG_DEBUG_SPINLOCK=y > CONFIG_DEBUG_MUTEXES=y > CONFIG_DEBUG_RWSEMS=y > CONFIG_DEBUG_SPINLOCK_SLEEP=y > CONFIG_DEBUG_LOCKING_API_SELFTESTS=y > CONFIG_DEBUG_KOBJECT=y > CONFIG_DEBUG_BUGVERBOSE=y > CONFIG_DEBUG_INFO=y > # CONFIG_DEBUG_VM is not set > CONFIG_DEBUG_LIST=y > CONFIG_FRAME_POINTER=y > CONFIG_FORCED_INLINING=y > # CONFIG_RCU_TORTURE_TEST is not set > CONFIG_WANT_EXTRA_DEBUG_INFORMATION=y > CONFIG_KGDB=y > CONFIG_KGDB_CONSOLE=y > # CONFIG_KGDB_ONLY_MODULES is not set > # CONFIG_KGDB_8250_NOMODULE is not set > CONFIG_KGDBOE_NOMODULE=y > CONFIG_KGDBOE=y > CONFIG_DEBUG_USER=y > CONFIG_DEBUG_ERRORS=y > CONFIG_DEBUG_LL=y > # CONFIG_DEBUG_ICEDCC is not set > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > CONFIG_CRYPTO=y > CONFIG_CRYPTO_ALGAPI=m > CONFIG_CRYPTO_BLKCIPHER=m > CONFIG_CRYPTO_MANAGER=m > # CONFIG_CRYPTO_HMAC is not set > # CONFIG_CRYPTO_XCBC is not set > # CONFIG_CRYPTO_NULL is not set > # CONFIG_CRYPTO_MD4 is not set > CONFIG_CRYPTO_MD5=m > # CONFIG_CRYPTO_SHA1 is not set > # CONFIG_CRYPTO_SHA256 is not set > # CONFIG_CRYPTO_SHA512 is not set > # CONFIG_CRYPTO_WP512 is not set > # CONFIG_CRYPTO_TGR192 is not set > # CONFIG_CRYPTO_GF128MUL is not set > CONFIG_CRYPTO_ECB=m > CONFIG_CRYPTO_CBC=m > # CONFIG_CRYPTO_LRW is not set > CONFIG_CRYPTO_DES=m > # CONFIG_CRYPTO_BLOWFISH is not set > # CONFIG_CRYPTO_TWOFISH is not set > # CONFIG_CRYPTO_SERPENT is not set > # CONFIG_CRYPTO_AES is not set > CONFIG_CRYPTO_CAST5=m > # CONFIG_CRYPTO_CAST6 is not set > # CONFIG_CRYPTO_TEA is not set > # CONFIG_CRYPTO_ARC4 is not set > # CONFIG_CRYPTO_KHAZAD is not set > # CONFIG_CRYPTO_ANUBIS is not set > # CONFIG_CRYPTO_DEFLATE is not set > # CONFIG_CRYPTO_MICHAEL_MIC is not set > # CONFIG_CRYPTO_CRC32C is not set > # CONFIG_CRYPTO_TEST is not set > > # > # Hardware crypto devices > # > > # > # Library routines > # > CONFIG_BITREVERSE=y > # CONFIG_CRC_CCITT is not set > # CONFIG_CRC16 is not set > CONFIG_CRC32=y > # CONFIG_LIBCRC32C is not set > CONFIG_ZLIB_INFLATE=y > CONFIG_ZLIB_DEFLATE=y > CONFIG_PLIST=y > CONFIG_IOMAP_COPY=y > > > -- Milind Dumbare Sr. Systems Engg. Linsyssoft Technologies. http://www.dumbare.com/ ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Kgdb-bugreport mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
