Look at these lines in dmesg eth0: Setting MAC address to 00:04:9f:22:22:22 I guess this is causing problem.
-Miline On 3/17/08, Himanshu Chauhan <[EMAIL PROTECTED]> wrote: > > Milind Dumbare wrote:se > > Hi Himanshu, > > Could you please post your grub entry and .config file > > -Miline > > Hello, > > I tried with this kernel parameter as well: > > > Kernel command line: root=/dev/mmcblk0p1 rootdelay=3 mem=32M > console=/dev/ttyS0,115200 > > [EMAIL PROTECTED]/eth0,[EMAIL PROTECTED]/00:16:76:B4:16:30 > > KGDB says that debugging is enabled over ethernet. > > kgdboe: local port 6442 > kgdboe: local IP 192.168.0.201 > kgdboe: interface eth0 > > kgdboe: remote port 6443 > kgdboe: remote IP 192.168.0.169 > kgdboe: remote ethernet address 00:16:76:b4:16:30 > > kgdboe: device eth0 not up yet, forcing it > eth0: Link now 100-FullDuplex > kgdboe: carrier detect appears untrustworthy, waiting 4 seconds > > kgdboe: debugging over ethernet enabled > > > But still I can't connect to the target board. > > Thanks and regards > > --Himanshu > -- Milind Dumbare Sr. Systems Engg. Linsyssoft Technologies. http://www.dumbare.com/ ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Kgdb-bugreport mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
