--- In [email protected], [EMAIL PROTECTED] wrote: > > On 11 Sep 2007 at 21:03, Magnus Beischer wrote: > > > For the unplated holes, do you have a way to get rid of copper around > > the hole when the hole is in a copper filled area? I don't want my > > mounting screws to touch the 0 V layer, because that will make a > > connection to the shield... (and I don't trust the solder mask...) > > > Make sure the hole is assigned to some net other than that assigned to the copper pour. > The copper pour will only connect to pads that are the same net. > > Dave - WB6DHW > <http://wb6dhw.com> >
Yes, I know, but if a want an unplated hole 3,2 mm diameter with no copper in a 6 mm diameter, I find no way to do that in the lib editor. I don't want to manually draw a trace at top and bottom layer to keep the copper pour area from reaching underneath my mounting screws. Please assist if there is another method. // Magnus
