Thank you, it seems a good way for me. I will try this. Peter
[EMAIL PROTECTED] írta: > I use testpoints for pads for jumpers. On your schematic you can place a > test point > component and draw a line(not a wire) between. Then on the PCB, the TP pads > will appear > since it is a component. I then draw lines on the silkscreen layer showing > the jumper > connections. > You could also make up a special schematic library component that has the 2 > pads. Then > make up a special pcb module with the pads and a line on the silkscreen layer > showing the > jumper location. The disadvantage to this is you would have to know ahead of > time the > distance between the 2 pins(that's why I use singe test points - they can be > moved at will > when doing the layout.) > > Dave - WB6DHW
