Hi
--- In [email protected], "fuzzyviv" <fuzzy...@...> wrote: > > > > But be sure to check your gerbers and drill files in either gerbv on linux, > or any gerber viewer in windows before sending. > Specially drill files. > I used the following settings for drill file dialog and it works- > > suppress leading zeros > precision 2:4 > origin - absolute > minimal header yes > mirror y axis - no > Hi, We are doing a project [1]. After Pcb Design Rules Check in PCBnew, I got two kinds of err, type 19[2] and type 23[3]. Do you think that those err are serious? From them, I am assuming they are detected because of judgement from kicad default settings. Also I followed and made settings as [4] and tried to create drill file[5], then I used a popular windows CAM gerber viewer to check it but I got err [6], do you think this is not caused by any potential errs we didn't know? Thanks Adam [1] http://projects.qi-hardware.com/index.php/p/board-qi-avt2/ [2] http://downloads.qi-hardware.com/hardware/qi_avt2/RC2/report/layout_note/20100104/drc_control_errtype19.jpg [3] http://downloads.qi-hardware.com/hardware/qi_avt2/RC2/report/layout_note/20100104/drc_control_errtype23.jpg [4] http://downloads.qi-hardware.com/hardware/qi_avt2/RC2/report/layout_note/20100104/drill_files_generation.jpg [5] http://downloads.qi-hardware.com/hardware/qi_avt2/RC2/report/layout_note/20100104/Qi_AVT2.drl [6] http://downloads.qi-hardware.com/hardware/qi_avt2/RC2/report/layout_note/20100104/DRLREAD.ERR
