Hi John, Maybe it is a warning, telling you that 2 outputs are connected together because the GND pins of both devices are defined as "output".
If it is an error, change the pin definition to "power pin". You will also be warned, but this time you can ignore the warning because you are sure that both GNDs can be connected together without any problem. Regards, Pedro. > Hi > > I have a 7805 and 7815 with the GND of each connected together. > > I am getting an error > > ErrType(5): Conflict problem between pins. Severity: error > > @ (163.830 mm,92.710 mm): Cmp #IC035, Pin GND (output) connected to > > @ (165.100 mm,102.870 mm): Cmp #IC034, Pin GND (output) (net 8) > > Any ideas? > > Cheers > > John > > > ------------------------------------ Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit http://www.kicadlib.org for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/kicad-users/join (Yahoo! ID required) <*> To change settings via email: kicad-users-dig...@yahoogroups.com kicad-users-fullfeatu...@yahoogroups.com <*> To unsubscribe from this group, send an email to: kicad-users-unsubscr...@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
