--- In [email protected], "Seroxatmad" <seroxat...@...> wrote: > > > > --- In [email protected], Brian Sidebotham <brian.sidebotham@> > wrote: > > > > > Hi > > > > > > So if i just ignore the warning they will be connected when i produce the > > > netlist/pcb? > > > > > > John > > > > > > > If you are bothering to use the error checking, you might as well > > correct the mistakes in the components. The GND pin of a 78xx > > regulator shouldn't be set to a type of "output". Instead it should be > > set to a type of "Power In". Connecting two power inputs together is > > obviously safe and will not generate errors. > > > > Best Regards, > > > > Brian. > > > > Hi > > I will > > They are the only components i did not make myself (either for the schematic > or PCB- i have just noticed they have not been added to the BOM yet have been > added to CVPCB! > > Cheers > > John > I have created a new 7805 and 7815 as a power part but it doesnt show in CVPCB and on the schematic IC (i was after IC1 and IC2) show as #ico33 and #ico32
Making the GND as input the crc check is clear. Any ideas John
