--- In [email protected], Pedro Martin <pki...@...> wrote: > > Hi John, > Maybe it is a warning, telling you that 2 outputs are connected together > because the GND pins of both devices are defined as "output". > > If it is an error, change the pin definition to "power pin". You will also be > warned, but this time you can ignore the warning because you are sure that > both GNDs can be connected together without any problem. > > Regards, > Pedro. > > > Hi > > > > I have a 7805 and 7815 with the GND of each connected together. > > > > I am getting an error > > > > ErrType(5): Conflict problem between pins. Severity: error > > > > @ (163.830 mm,92.710 mm): Cmp #IC035, Pin GND (output) connected to > > > > @ (165.100 mm,102.870 mm): Cmp #IC034, Pin GND (output) (net 8) > > > > Any ideas? > > > > Cheers > > > > John > > > > > > > Hi
So if i just ignore the warning they will be connected when i produce the netlist/pcb? John
