The manual I have has no date on it but the gear kit it came with was bought mid 90’s. It states “for tail dragged mount leg on front of spar angled forward and for tri-gear mount leg on rear of spar angled rearward”. The drawing Larry made is representative of the one in the manual. Now here is the kicker. The gear legs that actually came with that manual are angled on both leading edge and trailing edge. One side of the leg is angled more than the other and that edge goes against the mount. This will yield a distance of axle centerline from spar of approximately ten inches from the face of the spar for both options.
Mark Jones Oldsmar, Fl www.flykr2s.com flyk...@gmail.com Sent from my iPhone 7 _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
