My first set came from a donor KR2 I purchased in Mississippi. It was a tri gear and I was planning on using the gear legs for my conventional setup. After I purchased it, I found out that the legs were cut with angles on both sides. I was expecting them to have a straight edge on one side. I called Steve Glover and he told me that there is a difference between the two (when that happened, I don't know). I then purchased a brand new set through Steve, in 2014 I believe, for conventional gear and they are cut like the picture you provided.
On Tue, Jun 12, 2018 at 3:06 AM, Flesner via KRnet <firstname.lastname@example.org> wrote: > On 6/11/2018 1:32 PM, Christopher Pryce via KRnet wrote: > >> I have physically held both of them in my hand and there is a >> difference. >> > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > Chris, > > Do you recall the brand / supplier for each of the sets and what the > difference was? Maybe we can narrow this down. > > > Larry Flesner > > > _______________________________________________ > Search the KRnet Archives at https://www.mail-archive.com/k > r...@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > _______________________________________________ Search the KRnet Archives at https://email@example.com/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org