On 8/7/2020 12:52 PM, Mike Stirewalt via KRnet wrote:
Ken Cottle came up with a solution which has survived well for thirty
years plus. I don't know just where he got them, but he installed
brackets underneath both wings which can be tightened or loosened and
have a slot which holds one end of a long, skinny fiberglass 3-inch wide
strip that covers the gap top and bottom.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
A couple of small screws is sufficient to hold cover strips in place.
(700+ hours and counting) I screwed them directly in to the wing skin,
two at the trail edge and two midpoint. Don't over tighten and strip
out the hole or you will have to install a larger screw.
As always, YRMV............
Larry Flesner
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org